SL 1 128 23 G

Headers, Male Pins Overview

The SL 1 128 23 G is a single-row header connector manufactured by Fischer Elektronik. It features 23 positions with a 0.100 inch (2.54 mm) pitch. The contacts are gold-plated male pins designed for through-hole mounting. The connector utilizes a square pin cross-section of 0.635 mm and includes an insulating height of 2.6 mm. The overall length is 11.2 mm, with a contact length of 5.8 mm. The operating temperature range spans from -40°C to +163°C.

Headers, Male Pins Feature Summary

• Single-row board-to-board or wire-to-board interconnection capability
• Gold-plated contacts ensure reliable signal transmission
• Square pin design provides secure mechanical retention

Headers, Male Pins Applications

• Board-to-board stacking connections
• Wire-to-board assembly applications
• General electronic circuit interconnections

Headers, Male Pins Procurement Notes

Verify the specific ordering suffix 'G' confirms gold plating as per the manufacturer's datasheet. Ensure the required pin count matches the 23-position configuration. Confirm that the through-hole mounting style aligns with the target PCB layout requirements before finalizing procurement orders.

Headers, Male Pins Selection Notes

Select this component when a single-row, gold-plated header with a 2.54 mm pitch is required. The square pin geometry offers distinct mechanical advantages over round pins. Consider the thermal rating of +163°C for high-temperature environments. Verify compatibility with mating female connectors in the system design.

Headers, Male Pins Part Context

This part belongs to the SL 1 series of Fischer Elektronik headers. The series offers various pin counts and plating options. The SL 1 128 23 G specifically addresses needs for moderate density interconnects. It complements other variants in the lineup that differ in position count or surface finish specifications.

Headers, Male Pins Replacement Considerations

Direct substitutes within the same series include SL 1 128 21 G and SL 1 128 25 G for different pin counts. Cross-brand replacements require matching the 2.54 mm pitch, single-row format, and gold plating specification. Verify mechanical dimensions and thermal ratings before substitution.