SL0833001

$0.61

Description：ICL 33 OHM 20% 1.3A 8MM
Series：miniAMP
Mfr：Vishay Ametherm
Package：Bulk

SKU:0c1ca539dfc6 Category: Inrush Current Limiters (ICL) Brand: Vishay Ametherm

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

SL0833001 is listed in the Inrush Current Limiters (ICL) range at ChipApex. The manufacturer field lists Vishay Ametherm. Its product description is ICL 33 OHM 20% 1.3A 8MM. Review the specifications below when checking this part for your BOM.

Inrush Current Limiters (ICL) specifications for SL0833001

Description：ICL 33 OHM 20% 1.3A 8MM
Series：miniAMP
Mfr：Vishay Ametherm
Package：Bulk
R @ 25°C：33 Ohms
Tolerance：±20%
Current - Steady State Max：1.3 A
R @ Current：750 mOhms
Diameter：0.315" (8.00mm)
Lead Spacing：0.201" (5.10mm)
Grade：-
Qualification：-
Approval Agency：UL

Inrush Current Limiters (ICL) datasheet and documents for SL0833001

SL0833001

Inrush Current Limiters (ICL) Overview

The Vishay Ametherm SL0833001 is an NTC thermistor inrush current limiter designed for PCB mounting. It features a nominal resistance of 33 Ohms with a tolerance of ±20%. The component supports a maximum steady-state current of 1.3 A at 25°C and is rated for voltages including 120 VAC, 240 VAC, and 480 VAC. Physical dimensions include an 8 mm diameter and a radial kinked lead configuration with a 5 mm lead spacing.

Inrush Current Limiters (ICL) Feature Summary

Utilizes negative temperature coefficient (NTC) technology to suppress high inrush current surges during power-up.
Features UL approval for enhanced safety compliance in electronic circuits.
Designed with radial kinked leads for secure through-hole PCB mounting.

Inrush Current Limiters (ICL) Applications

Power supply input stages
Electronic ballast protection
Transformer inrush limiting

Inrush Current Limiters (ICL) Procurement Notes

Verify the specific voltage rating requirements against the datasheet specifications before procurement. Confirm that the 1.3 A steady-state current capacity aligns with the circuit's operational limits. Ensure the PCB layout accommodates the 8 mm body diameter and 5 mm lead spacing. Check for RoHS compliance status if required by project standards. Validate thermal management needs based on the dissipation factor.

Inrush Current Limiters (ICL) Selection Notes

Select this component when a 33 Ohm initial resistance is required to limit inrush current effectively. Consider the 1.3 A current rating for applications with moderate steady-state loads. The 8 mm form factor suits standard PCB layouts requiring compact protection. Evaluate the thermal environment to ensure operation within the specified temperature range. Compare energy absorption capabilities against potential surge events.

Inrush Current Limiters (ICL) Part Context

This part belongs to the SL08 series of inrush current limiters from Vishay Ametherm. The series offers various resistance values and current ratings tailored for different power levels. These components are widely used in consumer electronics and industrial equipment to protect sensitive downstream components from startup current spikes.