SN65MLVD200DRG4

Drivers, Receivers, Transceivers Overview

The SN65MLVD200DRG4 is a half-duplex multipoint transceiver manufactured by Texas Instruments, complying with the TIA/EIA-899 M-LVDS standard. It integrates one driver and one receiver in an SOIC-8 package. The device operates on a single 3.3-V supply (3 V to 3.6 V) and supports signaling rates up to 100 Mbps. Key electrical parameters include a typical driver propagation delay of 2.3 ns and a receiver delay of 5 ns. The common-mode input voltage range spans from -1 V to 3.4 V, providing noise immunity against ground shifts up to 2 V. Power dissipation is typically 50 mW for the driver and 30 mW for the receiver at maximum data rates.

Drivers, Receivers, Transceivers Feature Summary

• Complies with the Multipoint Low-Voltage Differential Signaling (M-LVDS) standard for robust multipoint communication.
• Features Type-1 receivers with 25 mV hysteresis to prevent output oscillations caused by signal noise.
• Driver output current is optimized to support doubly-terminated 50-ohm load applications.
• Operates glitch-free during power-up and power-down sequences without external control.

Drivers, Receivers, Transceivers Applications

• Half-duplex or multipoint baseband data transmission over controlled impedance media.
• Data transfer across printed circuit board traces and backplanes.
• Cable-based interconnects requiring high noise immunity in harsh electrical environments.

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific ordering suffix 'R' confirms the tape-and-reel packaging format required for automated assembly processes. Confirm that the 'G4' suffix indicates lead-free construction and RoHS compliance status as defined by the manufacturer's environmental declarations. Ensure the component matches the SN65MLVD200 functional specification rather than higher-speed variants like the SN65MLVD201.

Drivers, Receivers, Transceivers Selection Notes

Select this component when designing systems requiring M-LVDS compatibility with a 100 Mbps signaling limit. Choose this part over LVDS counterparts if the application demands a wider common-mode input range (-1 V to 3.4 V) to tolerate significant ground noise. Verify that the Type-1 receiver characteristics align with the system's noise environment requirements.

Drivers, Receivers, Transceivers Part Context

This device belongs to the SN65MLVD20x series of low-voltage differential line drivers and receivers. It is functionally similar to standard LVDS devices but includes enhanced features specifically designed for multipoint bus architectures. The series distinguishes between Type-1 and Type-2 receivers based on threshold offsets and hysteresis capabilities.

Drivers, Receivers, Transceivers Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation.