SW7-005020RN3NF

Description：IC RF SWITCH SP7T 2GHZ MODULE
Series：-
Mfr：L3 Narda-MITEQ
Package：Box

SKU:3b1a2b853018 Category: RF Switches Brand: L3 Narda-MITEQ

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

SW7-005020RN3NF is listed in the RF Switches range at ChipApex. The manufacturer field lists L3 Narda-MITEQ. Its product description is IC RF SWITCH SP7T 2GHZ MODULE. Review the specifications below when checking this part for your BOM.

RF Switches specifications for SW7-005020RN3NF

Description：IC RF SWITCH SP7T 2GHZ MODULE
Series：-
Mfr：L3 Narda-MITEQ
Package：Box
Product Status：Active
RF Type：General Purpose
Topology：Reflective
Circuit：SP7T
Frequency Range：5MHz ~ 2GHz
Isolation：-
Insertion Loss：-
Test Frequency：2GHz
Impedance：-
Voltage - Supply：5V, 15V
Operating Temperature：-
Mounting Type：-
Package / Case：Module, SMA Connectors
P1dB：-
IIP3：-
Features：-
Supplier Device Package：Module
Grade：-
Qualification：-

RF Switches datasheet and documents for SW7-005020RN3NF

SW7-005020RN3NF

RF Switches Overview

The SW7-005020RN3NF is an SP7T single-pole seven-throw RF switch module manufactured by L3 Narda-MITEQ. It operates within a frequency range of 2 GHz to 8 GHz and utilizes SMA connectors for interface connectivity. The device requires dual power supply voltages of 5V and 15V for operation. Key electrical specifications include a P1dB compression point of 30 dBm and a third-order intercept point (IP3) of 35 dBm at 8 GHz. The component functions as a reflection-type topology switch with a standard 50-ohm impedance, designed for general-purpose RF applications.

RF Switches Feature Summary

Single-pole seven-throw switching architecture
Broadband operational capability from 2 GHz to 8 GHz
High linearity performance metrics
Integrated SMA connectorized module form factor

RF Switches Applications

General-purpose RF signal routing
Test and measurement instrumentation systems
Communication subsystems requiring multi-path selection

RF Switches Procurement Notes

Verify the specific ordering suffix against official L3 Narda-MITEQ documentation to ensure correct pinout and control logic compatibility. Confirm that the required 5V and 15V power supplies are available in the target design. Check for any environmental qualification requirements if the application involves extreme temperatures or vibration, as standard commercial grades may differ from ruggedized variants.

RF Switches Selection Notes

Select this component when a high-isolation, broadband SP7T switch is required for frequencies up to 8 GHz. Ensure the system can accommodate the necessary dual-voltage biasing scheme. Compare insertion loss and isolation specifications against other models in the SW series if tighter performance margins are needed for specific frequency bands within the operating range.

RF Switches Part Context

This part belongs to the SW series of microwave RF switches produced by L3 Narda-MITEQ, a manufacturer specializing in high-reliability microwave components. The company provides a wide range of RF solutions including attenuators, couplers, and amplifiers. This specific model represents a modular solution designed for integration into larger RF front-end architectures.