SX3M25.000625A20F30TNN

Oscillators Overview

The SX3M25.000625A20F30TNN is a surface-mount active crystal oscillator manufactured by Shenzhen SCTF Electronics. It operates at a nominal frequency of 25.000625 MHz with a total frequency tolerance of ±20 ppm. The device requires a 5V supply voltage and draws a maximum operating current of 25 mA. It supports CMOS compatible logic levels and features an enable/disable control function via its input pin. The component is housed in a 4-SMD, No Lead package with dimensions of 7.0x5.0 mm. It is designed for reflow soldering and complies with Pb-free and RoHS/Green standards.

Oscillators Feature Summary

• CMOS compatible logic levels for standard digital interfacing
• Pin-compatible with standard 7.0×5.0mm packages
• Low jitter and tight stability design
• Output tri-state function with low power standby mode

Oscillators Applications

• Disc drives
• Networking equipment
• GPS/Navigation systems
• Bluetooth modules
• Ethernet interfaces

Oscillators Procurement Notes

Verify the exact part number suffix against the manufacturer's official datasheet to ensure correct frequency and tolerance specifications. Confirm that the 5V supply requirement aligns with the target system design. Check for RoHS compliance documentation if environmental regulations apply. Ensure the 7.0x5.0mm footprint matches the PCB layout constraints. Validate the enable/disable pin configuration for power management strategies.

Oscillators Selection Notes

Select this oscillator when a precise 25.000625 MHz clock signal is required with ±20 ppm stability. The 5V operating voltage makes it suitable for legacy or specific high-voltage digital circuits. Consider the 25mA current consumption for power budget calculations. The CMOS output level simplifies integration with standard logic families without additional buffering. The compact SMD package aids in space-constrained designs.

Oscillators Part Context

This component belongs to the SCTF SX3M series of surface-mount crystal oscillators. These devices are designed to provide stable timing signals for various electronic applications. The series typically offers options for different frequencies, voltages, and package sizes. Shenzhen SCTF Electronics specializes in manufacturing oscillators, resonators, and crystals for consumer electronics and industrial applications.

Oscillators Replacement Considerations

Direct substitutes may include other 25MHz CMOS oscillators from manufacturers like Epson, NDK, or SiTime, provided they match the 5V supply, 7.0x5.0mm footprint, and ±20ppm stability. Verify pinout compatibility, especially the enable/disable function. Cross-reference electrical parameters such as current consumption and jitter specifications to ensure functional equivalence.