SX3M4.096D10F20TNN

Oscillators Overview

The SX3M4.096D10F20TNN is a standard crystal oscillator manufactured by Shenzhen SCTF Electronics, operating at a nominal frequency of 4.096 MHz. It utilizes CMOS output logic and supports an enable/disable control function for power management. The device is designed for operation with a supply voltage of 1.8V and draws a typical current of 10mA. It is housed in a compact 4-SMD, No Lead package, suitable for surface-mount assembly on printed circuit boards.

Oscillators Feature Summary

• CMOS output signal generation
• Enable/disable control capability
• Low voltage operation

Oscillators Applications

• Digital clock distribution
• Microcontroller system timing
• Communication interface synchronization

Oscillators Procurement Notes

Verify the specific ordering suffix to confirm the supply voltage requirement, as the 'D' variant indicates 1.8V operation compared to other series members. Ensure the target design supports the required enable/disable pin configuration. Confirm the package footprint matches the 4-SMD no-lead specification during PCB layout. Check datasheet limits for load capacitance requirements if external components are used.

Oscillators Selection Notes

Select this component when a low-voltage 1.8V supply is available for the timing circuit. The CMOS output is compatible with standard digital logic families. Consider the enable feature if power conservation is required during idle states. Compare against the 3.3V version (SX3M4.096B10F20TNN) if the system operates at higher voltages. Ensure the frequency stability meets the application tolerance needs.

Oscillators Part Context

This part belongs to the SX3M series of surface-mount crystal oscillators from Shenzhen SCTF Electronics. The series offers various frequencies and voltage options. The SX3M4.096D10F20TNN specifically provides the 4.096 MHz frequency point with 1.8V operation, distinguishing it from the 3.3V equivalent models within the same product family.

Oscillators Replacement Considerations

The SX3M4.096B10F20TNN serves as a direct functional substitute if the system voltage is 3.3V instead of 1.8V. Verify pin compatibility and electrical parameters before swapping. Other manufacturers may offer equivalent 4.096 MHz CMOS oscillators in similar packages, but ensure voltage and current specifications match.