TLP3064(D4TP1S,C,F

$1.62

Description：OPTOISOLATOR 5KV TRIAC 1CH 6DIP
Series：-
Mfr：Toshiba Semiconductor and Storage
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:50d173f4a920 Category: Triac, SCR Output Optoisolators Brand: Toshiba Semiconductor and Storage

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TLP3064(D4TP1S,C,F is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists Toshiba Semiconductor and Storage. Its product description is OPTOISOLATOR 5KV TRIAC 1CH 6DIP. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for TLP3064(D4TP1S,C,F

Description：OPTOISOLATOR 5KV TRIAC 1CH 6DIP
Series：-
Mfr：Toshiba Semiconductor and Storage
Package：Tape & Reel (TR),Cut Tape (CT)
Output Type：Triac
Zero Crossing Circuit：Yes
Number of Channels：1
Voltage - Isolation：5000Vrms
Voltage - Off State：600 V
Static dV/dt (Min)：200V/µs
Current - LED Trigger (Ift) (Max)：3mA
Current - On State (It (RMS)) (Max)：100 mA
Current - Hold (Ih)：600µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.4V
Current - DC Forward (If) (Max)：30 mA
Operating Temperature：-40°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.300", 7.62mm), 5 Leads
Supplier Device Package：6-DIP (Cut), 5 Lead
Approval Agency：cUR, UR, VDE

Triac, SCR Output Optoisolators datasheet and documents for TLP3064(D4TP1S,C,F

TLP3064(D4TP1S,C,F

Triac, SCR Output Optoisolators Overview

The TLP3064(D4TP1S,C,F) is a zero voltage crossing turn-on photo-triac optocoupler featuring a GaAlAs infrared emitting diode. It provides high isolation with a minimum isolation voltage of 5000Vrms and a peak off-state voltage of 600V. The device supports a maximum trigger LED current of 3mA and an on-state current of 100mA. It includes VDE approval under DIN EN60747-5-2, with a maximum operating insulation voltage of 890VPK and highest permissible overvoltage of 8000VPK.

Triac, SCR Output Optoisolators Feature Summary

Zero voltage crossing turn-on functionality for reduced electrical noise
High isolation voltage rating of 5000Vrms
VDE approved option (D4) for enhanced safety compliance

Triac, SCR Output Optoisolators Applications

Office machines
Household use equipment
Triac driver circuits
Solid state relays

Triac, SCR Output Optoisolators Procurement Notes

Verify the specific suffix codes D4, TP1, S, C, and F against official Toshiba documentation to confirm exact packaging, tape/reel specifications, and regional certification status. Ensure the requested variant matches the required VDE approval level and package type before ordering. Cross-reference distributor part numbers with manufacturer datasheets to avoid substitution errors.

Triac, SCR Output Optoisolators Selection Notes

Select this component when zero-crossing switching is required to minimize electromagnetic interference in AC load control applications. The 600V peak off-state voltage suits standard mains voltage isolation tasks. Consider the 100mA on-state current limit for low-power triac triggering. Verify that the 5000Vrms isolation meets system safety requirements.

Triac, SCR Output Optoisolators Part Context

This part belongs to Toshiba’s TLP3064 series of photocouplers combining GaAlAs IREDs with photo-triacs. The series is designed for AC switch applications requiring galvanic isolation. The D4 suffix indicates VDE-approved variants, while other suffixes denote packaging or regional certifications within the broader TLP3064 family.