TLP759F(D4MBIMT4JF

Description：OPTOISO 5KV TRANS W/BASE 8-DIP
Series：-
Mfr：Toshiba Semiconductor and Storage
Package：Bulk

SKU:a313b970115a Category: Transistor, Photovoltaic Output Optoisolators Brand: Toshiba Semiconductor and Storage

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TLP759F(D4MBIMT4JF is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Toshiba Semiconductor and Storage. Its product description is OPTOISO 5KV TRANS W/BASE 8-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for TLP759F(D4MBIMT4JF

Description：OPTOISO 5KV TRANS W/BASE 8-DIP
Series：-
Mfr：Toshiba Semiconductor and Storage
Package：Bulk
Number of Channels：1
Voltage - Isolation：5000Vrms
Current Transfer Ratio (Min)：20% @ 16mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：-
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.65V
Current - DC Forward (If) (Max)：25 mA
Vce Saturation (Max)：-
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for TLP759F(D4MBIMT4JF

TLP759F(D4MBIMT4JF

Transistor, Photovoltaic Output Optoisolators Overview

The TLP759F(D4MBIMT4JF) is a high-speed optocoupler featuring a GaAlAs infrared emitting diode and a photodiode-transistor detector on a single chip. It provides an isolation voltage of 5000 Vrms (min) with a typical switching speed of tpHL = 0.2μs and tpLH = 0.3μs at RL=1.9 kΩ. The device offers TTL compatibility, UL recognition under file E67349, and VDE approval per EN 60747-5-5 for the D4 option.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Integrated Faraday shield on the photodetector chip for effective common mode noise transient immunity
VDE approved insulation rating for the D4 suffix variant
TTL logic compatible output interface

Transistor, Photovoltaic Output Optoisolators Applications

Digital logic ground isolation line receiver
Microprocessor system interfaces
Switching power supply feedback control
Transistor inverter circuits

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify that the specific ordering suffix matches the required safety certifications and packaging format. Confirm the D4 designation aligns with VDE approval requirements if applicable. Ensure the component status is active before finalizing procurement plans to avoid obsolescence risks.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high common mode noise immunity is critical due to the integrated Faraday shield. The VDE approval is necessary for applications requiring specific European safety standards. Verify the switching speed meets the system timing requirements under the intended load conditions.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the Toshiba TLP759 series of high-speed photocouplers. The series utilizes a GaAlAs LED paired with a monolithic photodiode-transistor detector. The family is designed for robust signal transmission across isolated boundaries in noisy industrial environments.