TPS76618DRG4

$0.58

Description：IC REG LINEAR 1.8V 250MA 8-SOIC
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)

SKU:3e0f25f6822c Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TPS76618DRG4 is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC REG LINEAR 1.8V 250MA 8-SOIC. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for TPS76618DRG4

Description：IC REG LINEAR 1.8V 250MA 8-SOIC
Series：-
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：1
Voltage - Input (Max)：10V
Voltage - Output (Min/Fixed)：1.8V
Voltage - Output (Max)：-
Voltage Dropout (Max)：-
Current - Output：250mA
Current - Quiescent (Iq)：50 µA
Current - Supply (Max)：-
PSRR：63dB (1kHz)
Control Features：Enable, Power Good
Protection Features：Over Current, Over Temperature, Reverse Polarity
Operating Temperature：-40°C ~ 125°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
Grade：-
Qualification：-

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for TPS76618DRG4

TPS76618DRG4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The TPS76618DRG4 is a fixed-output low-dropout linear voltage regulator from the TPS766 family, manufactured by Texas Instruments. It provides a nominal output voltage of 1.8V with a maximum load current capability of 250mA. The device supports an input voltage range up to 16V and operates within a junction temperature range of -40°C to 125°C. Key electrical characteristics include a typical quiescent current of 55µA at no load and a power-supply ripple rejection ratio of 63dB at 1kHz. It features internal soft-start, overcurrent limiting, and thermal shutdown protection.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

Integrated enable pin for controlling device operation and reducing standby current consumption
Open-drain power-good signal output for monitoring regulated voltage status
Internal circuitry providing overcurrent limiting and thermal shutdown protection

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Residential air conditioners
Body electronics and lighting systems
HVAC systems
Washers and dryers

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify that the specific part number corresponds to the legacy chip variant when sourcing, as the datasheet distinguishes between legacy and new chip specifications. Confirm the package type matches the required PCB footprint and ensure compliance with RoHS standards if applicable to the manufacturing process.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component for applications requiring a stable 1.8V rail from higher voltage sources like 10V or 12V rails. Consider the thermal resistance in the SOIC-8 package for heat dissipation under full load conditions. Ensure the input capacitor meets the recommended minimum value to maintain stability during operation.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This device belongs to the TPS766 series of low-dropout regulators designed for general-purpose power management. The series offers various fixed and adjustable output voltages to support different logic families and analog circuits. The TPS76618 specifically targets 1.8V requirements common in microcontrollers and processors.