XRCGB24M000F1H17R0

Crystals Overview

The Murata XRCGB24M000F1H17R0 is a surface-mount crystal unit with a nominal frequency of 24.0000 MHz. It features an initial frequency tolerance of ±10 ppm and a full-temperature frequency stability of ±35 ppm across the -40°C to +105°C range. The component utilizes a compact 2.0 x 1.6 mm package with a height of 0.65 mm. It operates with a load capacitance of 6.0 pF and has a maximum equivalent series resistance (ESR) of 80 Ω. The rated drive level is 150 μW, with a maximum limit of 300 μW. Annual aging is specified at ±2 ppm per year.

Crystals Feature Summary

• Compact 2.0x1.6mm SMD package for space-constrained designs
• Industrial temperature range operation from -40°C to +105°C
• Low ESR specification facilitating easy oscillation in low-power circuits
• Alumina substrate construction with metal lid cover

Crystals Applications

• General microcontroller clock sources
• Bluetooth communication modules
• Sub-GHz wireless applications
• IoT sensor nodes

Crystals Procurement Notes

Verify that the specific application environment does not exceed the -40°C to +105°C operating temperature range. Confirm that the circuit design strictly limits the drive level to a maximum of 300 μW to prevent frequency drift or mechanical damage. Ensure PCB layout adheres to recommended pad dimensions to avoid soldering defects. Note that this component is not hermetically sealed; therefore, washing the board or applying conformal coating directly over the device is prohibited to prevent internal contamination.

Crystals Selection Notes

Select this model when a small footprint is required alongside industrial temperature stability. The 6.0 pF load capacitance requires precise calculation of external matching capacitors, typically resulting in values around 7-8 pF depending on stray capacitance. Avoid using standard 12 pF capacitors which may cause significant frequency deviation. This part is suitable for general MCU timing but is not certified for automotive safety-critical systems without explicit manufacturer approval.

Crystals Part Context

This component belongs to the XRCGB series, designed for high-density surface mount applications. It replaces larger traditional crystals while maintaining comparable electrical performance. The series is optimized for consumer and industrial electronics where board real estate is limited. It serves as a direct substitute for other 2016 metric sized crystals with similar frequency and tolerance specifications.

Crystals Replacement Considerations

Public confirmed substitutes include XRCGB24M000F1H70R0 and XRCGB24M000F1H01R0. Verify load capacitance requirements as they vary between sub-models. Check temperature ranges, as some variants are limited to commercial grades (-20°C to +70°C). Ensure drive levels remain within safe limits for any cross-reference.

Crystals FAQ

Is this crystal hermetically sealed?

No, it uses an alumina substrate with a metal lid but is not hermetically sealed. Conformal coating or washing is prohibited.

What is the correct load capacitance value?

The specified load capacitance is 6.0 pF. External capacitors must be calculated based on this value and PCB stray capacitance.

Can this component be used in automotive safety applications?

No, it is not AEC-Q100 qualified. Use only for general industrial or consumer applications unless explicitly approved by Murata.