1405653

Overview

Phoenix Contact part number 1405653 is a sensor and actuator cable featuring a two-position configuration. It utilizes a straight M8 male connector with A coding on one end and a Valve Connector C (8 mm) on the other. The unit includes one integrated LED indicator and incorporates a built-in Zener diode for wiring protection. Nominal voltage is rated at 24 V DC, with a nominal current capacity of 4 A. Pulse power handling is specified at 40 W when applied for a duration of 100 µs.

Feature Summary

• Integrates a Zener diode within the wiring scheme for circuit protection
• Equipped with an indicator LED for operational status monitoring
• Features a straight M8 male plug with A coding for secure mating

Applications

• Industrial automation systems requiring sensor connectivity
• Actuator control circuits in machinery
• Valve interface connections using standard C-type connectors

Procurement Notes

Verify that the specific application requires the integrated Zener diode configuration, as this alters the electrical behavior compared to standard cables. Confirm compatibility with the target valve connector type C (8 mm). Ensure the M8 A-coding aligns with existing panel or device interfaces. Check if the fixed length options meet installation requirements, as custom lengths may be available through manufacturer channels.

Selection Notes

Select this component when a pre-wired solution with signal indication and overvoltage protection is required. The M8 to Valve Connector C transition simplifies assembly by eliminating separate cabling steps. Consider the 4 A current rating against peak load demands. The IP rating of the connectors must match the environmental exposure levels of the installation site.

Part Context

This item belongs to the Phoenix Contact SAC series of automation cables. These are designed for reliable data and power transmission in industrial environments. The product integrates mechanical housing, conductors, and electronic components into a single assembly to reduce installation time and potential connection errors in control panels.

Replacement Considerations

No public confirmed substitute part numbers are identified in the provided documentation. Direct replacement requires matching the M8 A-coding, Valve Connector C interface, and internal Zener diode specification.