1405875

Overview

The Phoenix Contact part number 1405875 corresponds to the QP 1,5/ 1-L GNYE plug-in component. This single-position terminal block plug features a 5.2 mm pitch and is designed for quick connection wiring methods. It supports rigid and flexible wire cross-sections ranging from 0.25 mm² to 1.5 mm² (AWG 24-16). The unit is rated for a nominal voltage of 500 V and a current capacity of 17.5 A. Constructed from PA insulation material with a green-yellow color scheme, it meets IEC 61984 standards for COMBI plugs and offers overvoltage category III protection.

Feature Summary

• Quick connection technology enables tool-free or simple assembly without screw terminals.
• COMBI plug design allows for load-free or voltage-free connection and disconnection.
• Green-yellow housing provides visual identification for protective earth circuits.

Applications

• Industrial control cabinet wiring
• Protective earth circuit connections
• Signal distribution in automation systems

Procurement Notes

Verify the specific ordering suffix matches the required configuration, as variations may exist within the product family. Confirm that the 5.2 mm pitch aligns with the mating base terminal blocks. Ensure the application environment respects the -60 °C to +105 °C operating temperature range and pollution level 3 classification specified in the technical data.

Selection Notes

Select this component when a single-position ground connection is required with a 5.2 mm spacing. The quick connection method suits high-volume assembly where speed is prioritized. Verify compatibility with the corresponding COMBI base connector series. Consider the green-yellow marking requirement for safety circuits before finalizing the selection.

Part Context

This item belongs to the QP series of plug-in components from Phoenix Contact. These are designed to mate with COMBI terminal blocks, providing a modular solution for electrical interconnections. The series emphasizes standardized dimensions and reliable contact performance for industrial applications.

Replacement Considerations

No public substitute part numbers are documented for this specific component.

FAQ

What is the maximum wire cross-section supported by this plug?

The plug supports a maximum wire cross-section of 1.5 mm² for both rigid and flexible conductors.

Does this component include a safety latch?

No, the left plug component described has a left housing without a safety latch.