2EDL8124GXUMA1

Gate Driver Overview

The Infineon Technologies 2EDL8124GXUMA1 is a junction-isolated high-side and low-side gate driver IC from the EiceDRIVER family. It features two non-inverting drivers with a peak output current of 4 A. The device operates on a supply voltage range of 8 V to 17 V and accepts CMOS logic inputs up to 5 V. Propagation delays are limited to 54 ns for both turn-on and turn-off states. It functions within an ambient temperature range of -40°C to +125°C and is housed in a PG-VSON-8-4 package.

Gate Driver Feature Summary

• Junction isolation technology provides electrical separation between control and power stages without requiring external transformers or optocouplers.
• Integrated bootstrap diode simplifies high-side drive circuit design by eliminating the need for discrete components.
• Non-inverting logic configuration ensures direct signal transmission from input to output for straightforward interface compatibility.

Gate Driver Applications

• Motor drives
• Inverters
• Power supplies

Gate Driver Procurement Notes

Verify component authenticity through authorized distributors or official manufacturer channels. Confirm RoHS compliance status and check for specific environmental certifications required by your region. Ensure storage conditions respect humidity sensitivity levels to prevent moisture-induced damage prior to soldering. Review the latest datasheet revisions for any updates to pinout definitions or thermal recommendations.

Gate Driver Selection Notes

Choose this component when junction isolation is preferred over transformer-based methods for compact designs. The 4 A output current suits medium-power switching applications. Consider the PG-VSON-8-4 package for space-constrained PCB layouts. Verify that the 5 V CMOS input logic matches your controller outputs. Evaluate thermal performance requirements against the package's dissipation capabilities.

Gate Driver Part Context

This part belongs to the 2EDL8x2x series of EiceDRIVER gate drivers, which utilize Infineon's proprietary junction isolation technology. This series replaces traditional isolated drivers with smaller footprints and higher reliability. The 2EDL8124G variant specifically targets applications requiring robust high-side and low-side driving with integrated bootstrap functionality.

Gate Driver Replacement Considerations

Check for direct substitutes within the 2EDL8123G series if different current ratings are needed. Verify pin-to-pin compatibility before swapping. Consult official replacement lists for end-of-life notifications. Ensure alternative parts maintain similar propagation delay characteristics and isolation voltage ratings.