532CC000174DGR

Pin ConfigurableSelectable Oscillators Overview

The Skyworks Solutions Inc. 532CC000174DGR is a standard clock oscillator from the Si532 series, designed as a dual frequency low jitter crystal oscillator (XO). It operates within a frequency range of 10 to 1417 MHz and provides two specific output frequencies: 45.1584 MHz and 49.152 MHz. The device features CMOS output format with a maximum duty cycle of 55 percent and a frequency stability of 7 PPM. It requires a supply voltage between 2.97 V and 3.63 V, typically operating at 3.3 V, with a current rating of 111 mA. The component is housed in a 7 mm x 5 mm SMD/SMT package and functions within an operating temperature range of -40 C to +85 C.

Pin ConfigurableSelectable Oscillators Feature Summary

• Dual frequency operation supporting 45.1584 MHz and 49.152 MHz outputs
• Low jitter performance typical of 0.3 ps phase jitter
• CMOS output format with pin 2 enable control
• Compact 7 mm x 5 mm surface mount package

Pin ConfigurableSelectable Oscillators Applications

• High-speed data communication interfaces
• Telecommunications equipment clocking
• Networking infrastructure timing
• Industrial control systems requiring precise frequency references

Pin ConfigurableSelectable Oscillators Procurement Notes

Verify that the ordering suffix DGR indicates tape and reel packaging rather than cut tape. Confirm the specific dual frequency selection matches the design requirement for 45.1584 MHz and 49.152 MHz. Ensure the CMOS output level compatibility aligns with the receiving logic circuitry. Check lead time availability as production cycles may vary.

Pin ConfigurableSelectable Oscillators Selection Notes

Select this model when dual frequency capability is required within the Si532 family. Compare against single frequency variants if only one output is needed. Consider the 7 PPM stability requirement versus higher precision options. Verify the 3.3 V supply constraint fits the system power budget. Evaluate the 111 mA current draw against thermal management capabilities.

Pin ConfigurableSelectable Oscillators Part Context

This component belongs to the Si532 series of dual frequency low jitter oscillators. It shares the same 7 mm x 5 mm footprint and general interface characteristics with other models in the series such as 532AA000104DGR and 532EC000813DGR. The primary distinction lies in the specific frequency pair and output format configuration.

Pin ConfigurableSelectable Oscillators Replacement Considerations

The 532CC000174DG is a parameter equivalent alternative available in cut tape packaging instead of tape and reel. Both parts share identical electrical specifications and functional characteristics.