74HC367PW,118

Buffers, Drivers, Receivers, Transceivers Overview

The Nexperia 74HC367PW,118 is a hex buffer and line driver featuring three-state outputs controlled by active-low output enable inputs (nOE). It operates within a supply voltage range of 2.0 V to 6.0 V and utilizes a TSSOP16 package (SOT403-1) with 16 leads. The device supports an ambient temperature range from -40 °C to +125 °C. Static characteristics include input leakage currents up to ±1.0 μA at maximum temperatures and supply currents reaching 160 μA. Dynamic performance specifies propagation delays of up to 29 ns at 4.5 V and enable/disable times up to 45 ns.

Buffers, Drivers, Receivers, Transceivers Feature Summary

• Hex buffer/line driver architecture with six non-inverting channels
• Three-state outputs managed by two active-low enable inputs
• CMOS construction providing low power dissipation and high noise immunity
• Input clamp diodes allowing interface to voltages exceeding VCC

Buffers, Drivers, Receivers, Transceivers Applications

• Bus-oriented transmissions
• Clock buffering and distribution
• Memory module address/data drivers

Buffers, Drivers, Receivers, Transceivers Procurement Notes

Verify the specific ordering suffix matches the required package variant. Confirm that the component version aligns with current JEDEC standards for ESD protection and latch-up performance. Ensure the selected part meets the necessary thermal derating requirements for the intended operating environment.

Buffers, Drivers, Receivers, Transceivers Selection Notes

Select this component when a hex buffer with three-state capability is required for bus applications. The HC logic family offers wide voltage compatibility compared to HCT variants. Consider the TSSOP16 package dimensions for PCB layout constraints and verify that the drive strength meets the load capacitance requirements of the destination circuitry.

Buffers, Drivers, Receivers, Transceivers Part Context

This component belongs to the 74HC series of CMOS logic devices manufactured by Nexperia. It functions as a standard hex buffer with tri-state outputs, widely used in digital systems for signal isolation and bus driving. The PW suffix indicates the Thin Shrink Small Outline Package configuration.

Buffers, Drivers, Receivers, Transceivers Replacement Considerations

The 74HCT367PW,118 serves as a functional replacement with TTL-compatible input levels. Other hex buffers like the 74HC244 or 74HC245 may be considered if different pinouts or inversion properties are acceptable.