7M-25.000MAAE-T

Crystals Overview

The 7M-25.000MAAE-T is a surface-mount parallel fundamental quartz crystal manufactured by TXC Corporation. It operates at a nominal frequency of 25 MHz with a load capacitance of 12 pF. The component exhibits a frequency tolerance and stability of ±30 ppm, alongside an equivalent series resistance (ESR) of 60 Ohms. Designed for robust performance, it functions within an operating temperature range of -20°C to +70°C. The device utilizes a 4-SMD, no-lead package measuring 3.20 mm in length, 2.50 mm in width, and 0.80 mm in maximum height.

Crystals Feature Summary

• Surface-mount parallel fundamental quartz crystal design
• High reliability with RoHS3 compliance
• Moisture sensitivity level 1 for extended shelf life

Crystals Applications

• Microcontroller clock references
• Portable consumer electronics
• Digital signal processing circuits

Crystals Procurement Notes

Verify the specific suffix 'AAE' against official datasheets to confirm the 12 pF load capacitance and -20°C to +70°C temperature range. Ensure compatibility with circuit designs requiring 60 Ohm ESR. Confirm RoHS3 status and MSL rating prior to integration into production workflows.

Crystals Selection Notes

Select this component when a 25 MHz reference with ±30 ppm stability is required in a compact 3.2x2.5 mm footprint. It is suitable for applications where moderate frequency precision is acceptable. Consider alternative models if wider temperature ranges or tighter tolerances are necessary for the target environment.

Crystals Part Context

This part belongs to the 7M series of SMD crystals from TXC Corporation. The series offers various frequency options and package sizes. The 7M-25.000MAAE-T specifically addresses needs for standard microcontroller timing in space-constrained portable devices.

Crystals Replacement Considerations

Cross-reference with other 25 MHz SMD crystals featuring 12 pF load capacitance and similar physical dimensions. Verify electrical parameters such as ESR and frequency stability match the original design requirements before substitution.