7W-24.000MBD-T

Description：XTAL OSC XO 24.0000MHZ CMOS SMD
Series：7W
Mfr：TXC CORPORATION
Package：Tape & Reel (TR)

SKU:252e2cf7a574 Category: Oscillators Brand: TXC CORPORATION

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

7W-24.000MBD-T is listed in the Oscillators range at ChipApex. The manufacturer field lists TXC CORPORATION. Its product description is XTAL OSC XO 24.0000MHZ CMOS SMD. Review the specifications below when checking this part for your BOM.

Oscillators specifications for 7W-24.000MBD-T

Description：XTAL OSC XO 24.0000MHZ CMOS SMD
Series：7W
Mfr：TXC CORPORATION
Package：Tape & Reel (TR)
Base Resonator：Crystal
Type：XO (Standard)
Frequency：24 MHz
Function：Enable/Disable
Output：CMOS
Voltage - Supply：3.3V
Frequency Stability：±25ppm
Absolute Pull Range (APR)：-
Operating Temperature：-40°C ~ 85°C
Spread Spectrum Bandwidth：-
Current - Supply (Max)：20mA
Ratings：-
Mounting Type：Surface Mount
Package / Case：4-SMD, No Lead
Size / Dimension：0.276" L x 0.197" W (7.00mm x 5.00mm)
Height - Seated (Max)：0.056" (1.42mm)
Supplier Device Package：-

Oscillators datasheet and documents for 7W-24.000MBD-T

7W-24.000MBD-T

Oscillators Overview

The 7W-24.000MBD-T is a standard CMOS crystal oscillator manufactured by TXC Corporation, operating at a nominal frequency of 24 MHz. It features a supply voltage range of 3.3V and delivers a CMOS output signal. The component provides a frequency stability of ±25 ppm and includes an enable/disable function for power management. Designed for surface-mount assembly, it utilizes a 4-SMD package with dimensions of 7.00mm x 5.00mm. The device supports an industrial operating temperature range from -10°C to +70°C.

Oscillators Feature Summary

CMOS output format suitable for digital logic interfaces
Integrated enable/disable control for active power management
Surface-mount construction for automated PCB assembly

Oscillators Applications

General-purpose clock signal generation in embedded systems
Timing reference for microcontrollers and processors
Data communication interface synchronization

Oscillators Procurement Notes

Verify the specific suffix 'BD' against official datasheets to confirm the ±25 ppm stability rating, as variations exist within the 7W series. Confirm that the 3.3V supply requirement aligns with target circuit design. Check current lifecycle status, as this model may be subject to discontinuation notices. Ensure ESD handling protocols are followed during storage and installation.

Oscillators Selection Notes

Select this component when a 24 MHz clock source with moderate stability is required. The ±25 ppm tolerance suits applications where tight frequency accuracy is not critical. The enable pin allows system-level power optimization. Compare against the 7W-24.000MAB-T if higher stability or different voltage levels are needed. Verify package compatibility with existing footprint designs.

Oscillators Part Context

This part belongs to the 7W series of standard oscillators from TXC Corporation. The series offers various frequencies and stability options in a common 7x5mm SMD package. It serves as a direct replacement for legacy through-hole crystals in modern compact electronics. The product line emphasizes cost-effective timing solutions for consumer and industrial devices.