800-V3-005-20-101101

Headers, Male Pins Overview

The Preci-Dip 800-V3-005-20-101101 is a right-angle board-to-board header connector featuring three male pin positions with a 0.200-inch (5.08mm) pitch. It utilizes through-hole termination and employs a push-pull locking mechanism for secure mating. The contacts are constructed from brass, featuring gold plating on the mating interface and tin plating on the tail. The insulator is made of black glass-filled PCT material rated UL94 V-0. Electrical ratings include 3A current capacity and 150VDC voltage. Operating temperature ranges from -55°C to 125°C.

Headers, Male Pins Feature Summary

• Right-angle board-to-board configuration with push-pull locking
• Gold-plated mating contacts for reliable signal transmission
• Glass-filled PCT insulation with UL94 V-0 fire rating

Headers, Male Pins Applications

• High-density electronic assemblies requiring vertical space constraints
• Industrial control systems needing robust mechanical retention
• Consumer electronics utilizing standard 5.08mm spacing

Headers, Male Pins Procurement Notes

Verify that the specific part number matches the required three-position configuration and right-angle orientation. Confirm compatibility with the mating socket series, such as the 801 series, ensuring correct gender and contact type alignment. Check for RoHS compliance status if environmental regulations apply to the final assembly. Ensure the push-pull locking mechanism is suitable for the intended vibration environment.

Headers, Male Pins Selection Notes

Select this component when a rigid, right-angle connection is necessary with a 5.08mm pitch. The push-pull feature distinguishes it from standard press-fit headers, offering easier insertion and extraction. Consider the thermal range and current rating against the application's electrical load. Verify that the PCB layout accommodates the right-angle profile and through-hole requirements without interference.

Headers, Male Pins Part Context

This model belongs to the Preci-Dip 800 series, designed for high-reliability interconnects. The 'V3' suffix typically denotes specific material or processing variations within the series. As a header with male pins, it pairs with female socket connectors to establish circuit pathways. The 5.08mm pitch provides ample spacing for higher voltage isolation compared to finer pitches.

Headers, Male Pins Replacement Considerations

Direct substitutes must maintain the 3-position count, 5.08mm pitch, right-angle form factor, and push-pull locking mechanism. Verify that alternative manufacturers offer identical contact materials and insulation ratings. Cross-reference mating sockets to ensure mechanical and electrical compatibility before substitution.