8Q-24.000MDDQ-T

Crystals Overview

The TXC Corporation 8Q-24.000MDDQ-T is a quartz crystal resonator operating at a fundamental frequency of 24 MHz. It utilizes a seam seal package with dimensions of 1.6 mm in length, 1.2 mm in width, and 0.35 mm in height. The component features a four-terminal surface mount (SMD/SMT) configuration without leads. It exhibits a frequency tolerance and stability of ±20 ppm at 25°C and within the -20°C to +70°C temperature range. The device requires a load capacitance of 10 pF and has an equivalent series resistance (ESR) of 100 Ohms. The maximum drive level is specified at 50 uW.

Crystals Feature Summary

• Seam seal construction utilizing ceramic materials for environmental protection
• Four-pad surface mount termination for automated assembly compatibility
• Defined frequency stability across standard commercial temperature ranges

Crystals Applications

• Clock signal generation for microprocessors and microcontrollers
• Timing references for communication interface circuits
• Frequency control in consumer electronic devices

Crystals Procurement Notes

Verify the specific suffix designations against the manufacturer's current datasheet to ensure alignment with required tolerance and stability specifications. Confirm that the seam seal package type matches the PCB footprint requirements. Check RoHS compliance status through official documentation prior to integration. Ensure the load capacitance parameters align with the target oscillator circuit design to maintain accurate frequency performance.

Crystals Selection Notes

Select this component when a compact 1.6mm x 1.2mm quartz crystal is required for 24 MHz applications. The ±20 ppm stability suits general-purpose timing needs rather than high-precision synchronization. Consider the 100 Ohm ESR and 50 uW drive level limits during oscillator circuit design. This part is suitable for designs where space constraints necessitate small form factors while maintaining standard quartz reliability.

Crystals Part Context

This model belongs to the 8Q series of quartz crystals from TXC Corporation. The series offers various frequencies and package sizes, with the 8Q variant specifically denoting the 1.6mm x 1.2mm seam seal footprint. These components are designed as drop-in replacements for larger traditional crystals in modern miniaturized electronics.

Crystals Replacement Considerations

Direct substitutes include other 24 MHz crystals with identical 1.6mm x 1.2mm seam seal packages and matching electrical parameters. Verify that alternative parts support the same 10 pF load capacitance and 100 Ohm ESR. Cross-reference stability ratings to ensure the replacement meets the ±20 ppm requirement for the intended operating temperature range.