A1-706E2CTH

Overview

The Hoffman A1-706E2CTH is a wall-mount enclosure constructed from polycarbonate, designed for industrial environments requiring dielectric protection. It features a transparent cover allowing visual inspection of internal components without opening the unit. The enclosure measures 7 inches in height, 6 inches in width, and 3 inches in depth. It includes a gasketed door seal to enhance environmental resistance against dust and moisture ingress. The unit is rated IP65 when closed, ensuring protection against limited dust ingress and water jets from any direction.

Feature Summary

• Transparent polycarbonate construction enables direct visual monitoring of internal equipment status
• Gasketed sealing mechanism provides enhanced environmental protection against dust and water
• Wall-mount design facilitates secure installation on vertical surfaces

Applications

• Enclosure for electrical control panels in light industrial settings
• Protection for electronic modules requiring visual accessibility
• Mounting housing for sensors or small circuit boards in controlled environments

Procurement Notes

Verify that the specific application environment does not exceed the material temperature limits of polycarbonate. Confirm that the required ingress protection rating aligns with the IP65 specification achieved only when the door is fully latched. Ensure mounting hardware is compatible with the pre-drilled holes provided in the enclosure frame.

Selection Notes

Select this model when visual inspection of internal components is critical and moderate environmental protection is sufficient. Consider the polycarbonate material properties regarding chemical resistance if exposed to harsh solvents. Evaluate whether the internal volume accommodates all necessary components with adequate clearance for heat dissipation.

Part Context

This part belongs to the Hoffman A1 series of polycarbonate enclosures. These units are generally used for smaller-scale industrial applications where transparency and basic environmental sealing are prioritized over heavy-duty mechanical impact resistance found in metal alternatives.

Replacement Considerations

Direct substitutes must match the external dimensions of 7x6x3 inches and maintain IP65 ratings. Verify compatibility with existing mounting patterns. Alternative materials such as ABS or stainless steel may be considered if chemical resistance or impact strength requirements differ.