A24D2410

Overview

The Hoffman Enclosures A24D2410 is a steel enclosure with dimensions of 24.00 inches in length, 24.00 inches in width, and 10.00 inches in depth. It features an ANSI 61 gray polyester powder finish over a pretreated surface. The unit holds UL and CSA approvals and meets NEMA Type 9 and IP60 ratings.

Feature Summary

• Constructed from thick gauge steel for structural integrity
• Finished with gray polyester powder coating on interior and exterior surfaces
• Certified for hazardous locations containing combustible dusts

Applications

• Class II Division 1 hazardous locations
• Class II Division 2 hazardous locations
• Environments with presence of combustible dusts per National Electrical Code Article 500

Procurement Notes

Verify the specific manufacturing source, as nVent Hoffman products may be distributed under different branding. Confirm that the received unit matches the A24D2410 designation and includes valid UL and CSA certification marks. Ensure the physical dimensions align with the required 24x24x10 inch specifications before installation in classified areas.

Selection Notes

Select this model when a robust steel enclosure is required for environments with combustible dust hazards. The NEMA Type 9 rating indicates suitability for dust-tight applications. Verify that the internal volume accommodates all necessary components while maintaining required clearances for heat dissipation and maintenance access within the hazardous zone constraints.

Part Context

This component belongs to the A9 Series of hazardous location enclosures manufactured by Hoffman Enclosures, Inc., now part of nVent. These units are designed specifically for industrial settings where safety standards require protection against dust ignition. The series provides standardized sizes to simplify integration into existing electrical systems.

Replacement Considerations

Direct substitutes must match the 24x24x10 inch footprint and NEMA Type 9 rating. Verify compatibility with existing mounting hardware and conduit entries. Ensure any replacement maintains the same UL and CSA listings for the specific hazardous location class.