A36X1E2808

Overview

The Hoffman Enclosures A36X1E2808 is a Type 12 steel disconnect enclosure with dimensions of 36.00 inches in height, 28.25 inches in width, and 8.00 inches in depth (914.4mm x 717.55mm x 203.2mm). Constructed from gray steel with a thickness of 0.074 inches (1.88mm), it features a hinged door design. The unit holds NEMA 12, IP55, and UL 508A ratings for environmental protection.

Feature Summary

• Type 12 rated construction providing protection against falling dirt and dripping non-corrosive liquids
• Low-profile design optimized for space-constrained mounting applications
• Includes a standard hinge mechanism with a two-point latch system for secure closure

Applications

• Industrial electrical disconnect installations
• Control panel housing for machinery
• Enclosure for low-voltage circuit protection devices

Procurement Notes

Verify the exact dimensional requirements against the 36x28.25x8 inch specification before ordering. Confirm that the Type 12 rating aligns with the specific environmental conditions of the installation site. Ensure compatibility with existing mounting hardware and internal component layouts. Check for any specific UL listing requirements relevant to the final equipment assembly.

Selection Notes

Select this model when a robust, grounded steel enclosure is required for indoor industrial environments. It is suitable for applications needing protection from dust and oil splashes without requiring watertight sealing. Consider the low-profile form factor if vertical space is limited but horizontal area is available. Verify that the internal volume accommodates all necessary components with adequate clearance.

Part Context

This part belongs to the Hoffman A36 series of disconnect enclosures. It is designed as a standalone unit for housing electrical switches and breakers. The series typically offers various sizes to accommodate different load requirements. It is manufactured by nVent Hoffman, a provider of industrial enclosure solutions.

Replacement Considerations

Direct substitutes may include other Type 12 steel enclosures with identical or compatible dimensions from the same manufacturer. Cross-referencing with models like A30X1E2808 requires careful verification of height differences, as the A36 series is taller than the A30 series.