ADC08D1010DIYB/NOPB

Analog To Digital Converters (ADC) Overview

The ADC08D1010DIYB/NOPB is a dual, low-power, high-performance CMOS analog-to-digital converter manufactured by Texas Instruments. It digitizes signals to an 8-bit resolution at sampling rates up to 1.0 GSPS. The device utilizes a folding and interpolating architecture with fully differential comparators and a self-calibration scheme. It operates from a single +1.9V supply, consuming approximately 1.6W at full speed. Key electrical parameters include a typical ENOB of 6.9 bits at 500 MHz input, a bit error rate of 10^-15, and guaranteed no missing codes across the industrial temperature range.

Analog To Digital Converters (ADC) Feature Summary

• Dual-channel architecture supporting interleaved operation for 2x sampling rate
• Internal sample-and-hold amplifier with self-calibration capability
• LVDS digital outputs compliant with IEEE 1596.3-1996 standards
• Serial interface for extended control and synchronization

Analog To Digital Converters (ADC) Applications

• Direct RF down conversion systems
• Digital oscilloscopes
• Satellite set-top boxes
• Communications systems
• Test instrumentation equipment

Analog To Digital Converters (ADC) Procurement Notes

Verify that the exposed pad on the 128-lead LQFP package is soldered to a ground plane to ensure rated thermal performance and electrical specifications. Confirm the operating temperature range matches the Industrial specification (-40°C to +85°C). Ensure power supply decoupling meets the datasheet requirements for VA and VDR pins to maintain signal integrity.

Analog To Digital Converters (ADC) Selection Notes

Select this component when high-speed 8-bit resolution is required with low power consumption. The device supports both SDR and DDR output clocking modes. Consider the Dual Edge Sampling (DES) mode if a higher effective sampling rate is needed using a single clock input. Verify that the analog input common mode voltage aligns with the VCMO pin output capabilities.

Analog To Digital Converters (ADC) Part Context

This part belongs to the ADC08D1010 series, which includes variants such as the ADC08D1010DIYB. The NOPB suffix indicates a lead-free and RoHS-compliant manufacturing process. The device was originally developed by National Semiconductor before its acquisition by Texas Instruments. It serves as a high-performance solution for wideband signal processing applications requiring precise timing and low jitter.

Analog To Digital Converters (ADC) Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. Designers should verify pin compatibility and electrical specifications when considering alternative components from other manufacturers.