ADC10064CIWM/NOPB

Analog To Digital Converters (ADC) Overview

The ADC10064CIWM/NOPB is a 10-bit analog-to-digital converter featuring an internal sample-and-hold circuit and a four-channel input multiplexer. It operates on a single +5V supply with a typical conversion time of 600 ns and a maximum sampling rate of 800 kHz. The device utilizes a patented multistep flash architecture to achieve high speed while maintaining low power dissipation, typically 235 mW max. It provides tri-state digital outputs for direct microprocessor interfacing without external logic. The component is housed in a 28-pin SOIC package and supports an operating temperature range from -40°C to +85°C.

Analog To Digital Converters (ADC) Feature Summary

• Integrated Sample-and-Hold and 4-Channel Multiplexer
• 10-Bit Resolution with 800 kHz Sampling Rate
• Single +5V Supply Operation
• Tri-State Digital Outputs for Direct Microprocessor Interface

Analog To Digital Converters (ADC) Applications

• Digital Signal Processor Front Ends
• Instrumentation Systems
• Disk Drive Controllers
• Mobile Telecommunications Equipment

Analog To Digital Converters (ADC) Procurement Notes

Verify the obsolete status of this component family before procurement planning. Confirm that the specific CIWM suffix meets thermal requirements, as the junction-to-ambient thermal resistance is 78°C/W. Ensure supply chain sources provide valid production data documentation rather than obsolete reference materials.

Analog To Digital Converters (ADC) Selection Notes

Select this model when four analog inputs require digitization within a single package. The ADC10064 differs from the ADC10062 by including two select pins (S0, S1) for four channels instead of one. Use the Speed Adjust pin with an external resistor to reduce conversion time below 600 ns if linearity constraints allow.

Analog To Digital Converters (ADC) Part Context

This part belongs to the ADC1006x family, which also includes the ADC10061 (single channel) and ADC10062 (dual channel). Texas Instruments designates these devices as obsolete, providing them for reference only. The ADC10064 specifically adds the fourth input channel compared to its predecessors.

Analog To Digital Converters (ADC) Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided source material.