ADC1413D065HN-C1

Analog To Digital Converters (ADC) Overview

The ADC1413D065HN-C1 is a dual-channel, 14-bit pipelined Analog-to-Digital Converter (ADC) manufactured by Renesas Electronics Corporation. It operates at a sampling rate of 65 Msps and features a serial JESD204A interface with two differential output lanes. The device requires a 3 V analog supply (VDDA) and a 1.8 V digital supply (VDDD). Key electrical specifications include a typical Signal-to-Noise Ratio (SNR) of 72.1 dBFS at 3 MHz input frequency, a Spurious-Free Dynamic Range (SFDR) of 86 dBc, and an input bandwidth of 600 MHz. It supports programmable full-scale input ranges from 1 V to 2 V peak-to-peak and includes an integrated SPI for configuration.

Analog To Digital Converters (ADC) Feature Summary

• Dual 14-bit pipelined architecture with 65 Msps sampling rate
• Serial JESD204A compliant interface with two configurable differential output lanes
• High dynamic performance: 72.1 dBFS SNR and 86 dBc SFDR at 3 MHz
• Programmable full-scale input range of 1 V to 2 V (p-p)
• Integrated Duty Cycle Stabilizer (DCS) and clock divider

Analog To Digital Converters (ADC) Applications

• Wireless and wired broadband communications
• Imaging systems
• Ultrasound equipment
• Software defined radio
• Portable instrumentation

Analog To Digital Converters (ADC) Procurement Notes

Verify the manufacturer designation on official documentation, as the datasheet identifies Integrated Device Technology (IDT) as the original designer, while current branding may reflect Renesas Electronics Corporation following corporate acquisitions. Confirm the specific suffix 'C1' corresponds to the required package variant and environmental compliance status. Ensure compatibility with the HVQFN56 (SOT684-7) footprint during procurement planning.

Analog To Digital Converters (ADC) Selection Notes

Select this component when a dual-channel 14-bit resolution is required at 65 Msps with JESD204A serialization. It is suitable for applications demanding high linearity (INL ±5 LSB) and low power consumption (885 mW at 65 Msps). Consider the 600 MHz input bandwidth for wideband signal acquisition. Ensure the system design accommodates the 3 V analog and 1.8 V digital supply rails and provides appropriate termination for the CML serial outputs.

Analog To Digital Converters (ADC) Part Context

This part belongs to the ADC1413D series, which includes variants operating at 80 Msps, 105 Msps, and 125 Msps. The device shares pin compatibility with the ADC1613D, ADC1213D, and ADC1113D125 series, facilitating potential upgrades or downgrades in resolution or speed within the same package form factor. The series utilizes a proprietary error correction method to guarantee zero missing codes across the operating range.

Analog To Digital Converters (ADC) Replacement Considerations

Pin-compatible alternatives within the same family include the ADC1413D080HN-C1, ADC1413D105HN-C1, and ADC1413D125HN-C1. These parts offer higher sampling rates but must be evaluated for thermal dissipation requirements, as power consumption increases with speed. Cross-family replacements like the ADC1613D series are also pin-compatible but differ in bit resolution.