ADG701LBRJZ-REEL7

Analog Switches, Multiplexers, Demultiplexers Overview

The ADG701LBRJZ-REEL7 is a monolithic CMOS single-pole single-throw (SPST) analog switch manufactured by Analog Devices Inc. It operates on a single supply voltage ranging from 1.8 V to 5.5 V and features a typical on resistance of 2 Ω with low flatness. The device provides a −3 dB bandwidth exceeding 200 MHz, fast switching times with tON at 18 ns maximum and tOFF at 12 ns maximum, and extremely low power consumption. It is housed in a 5-lead SOT-23 package and supports an industrial temperature range from -40°C to +85°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Low On Resistance: Features a typical on resistance of 2 Ω with low flatness for minimal signal attenuation.
• High Bandwidth: Achieves a −3 dB bandwidth greater than 200 MHz suitable for high-frequency applications.
• Fast Switching: Provides rapid transition times with maximum tON of 18 ns and tOFF of 12 ns.
• Low Power Dissipation: CMOS construction ensures typical power consumption below 0.01 μW.

Analog Switches, Multiplexers, Demultiplexers Applications

• Battery-powered systems requiring low power consumption
• Communications systems for signal routing
• Sample-and-hold circuits
• Audio signal routing
• Video switching applications

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix REEL7 confirms tape and reel packaging upon procurement. Confirm RoHS compliance status indicated by the Z suffix in the part number. Ensure the supplier provides the official Analog Devices datasheet Rev. A for accurate electrical parameter validation before integration into designs.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a single-channel SPST switch is required within a 1.8 V to 5.5 V supply range. Consider the 5-lead SOT-23 package for space-constrained PCB layouts. Verify that the 2 Ω typical on resistance meets system loss requirements and that the 200 MHz bandwidth aligns with signal frequency specifications.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the ADG701L/ADG702L family of CMOS low voltage switches. The ADG701 variant is configured as a Normally Open (NO) switch, while the ADG702 is Normally Closed (NC). Both share identical electrical characteristics and pinouts, differing only in their default switch state logic.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Direct pin-compatible replacements within the same family include ADG702LBRJZ-REEL7, which offers the same electrical performance but functions as a Normally Closed switch instead of Normally Open.