AHE18X12X4

Overview

The Hoffman Enclosures AHE18X12X4 is a Type 1 hinged-cover pull box constructed from 16-gauge steel with a gray painted finish. It measures 18 inches in length, 12 inches in width, and 4 inches in depth (457mm x 305mm x 102mm). The enclosure features butt hinges and a recessed, slotted flush quarter-turn latch for secure closure. Knockouts are provided on all four sides to facilitate cable entry.

Feature Summary

• Constructed from 16-gauge steel with a durable gray painted finish
• Equipped with butt hinges allowing door removal or side adjustment
• Includes a recessed, slotted flush quarter-turn latch for security
• Features removable concentric knockouts on all four sides

Applications

• General purpose electrical pull boxes
• Industrial control panel wiring
• Commercial building electrical distribution
• Low voltage signal routing

Procurement Notes

Verify the specific knockout configuration required for your installation, as knockouts are present on all four sides but may require removal. Confirm that the 16-gauge steel thickness meets your structural load requirements. Ensure the NEMA 1 rating aligns with your indoor environmental conditions, as this enclosure does not provide protection against water ingress or dust accumulation beyond basic splashing.

Selection Notes

Select this model when a compact, indoor-rated enclosure is needed for wire management rather than component housing. The 4-inch depth limits internal component size, making it suitable primarily for pulling wires or mounting small devices. Compare dimensions against competitors if space constraints are critical, noting the external measurements include the latch and hinge hardware.

Part Context

This part belongs to the Hoffman AHE series of painted steel enclosures. These units are designed for general industrial and commercial use where environmental protection is limited to NEMA 1 standards. They serve as foundational components for organizing electrical connections in controlled indoor environments.

Replacement Considerations

Direct substitutes include other NEMA 1 steel pull boxes with identical 18x12x4 inch dimensions. Verify that replacement models maintain the same 16-gauge steel gauge and offer compatible knockout patterns. Hinge orientation and latch mechanisms should be checked for compatibility with existing mounting structures.