AP36L44

Overview

The AP36L44 is a straight pedestal with legs manufactured by Hoffman Enclosures, Inc., designed for floor mounting HMI enclosures. Constructed from steel with a polyester powder painted finish in ANSI 61 Medium Gray, it features four die-cast legs bolted to a vertical tube. The unit measures 36 inches in height with a 4-inch by 4-inch cross-section. The legs include holes for bolting the pedestal to the floor and can accept casters in limited applications.

Feature Summary

• Supports optimal viewing and operating angles for Human-Machine Interface (HMI) enclosures
• Provides sturdy floor mounting via die-cast legs attached to a vertical tube
• Features pre-drilled leg holes for secure anchoring to the floor surface

Applications

• Mounting CONCEPT HMI enclosures
• Mounting INLINE HMI enclosures
• Supporting ProLine 8 x 8 inch Pedestal enclosures

Procurement Notes

Verify that the required enclosure dimensions match the 4x4 inch pedestal specification. Confirm whether fixed floor mounting or caster compatibility is needed, as caster use is limited. Ensure the ANSI 61 Medium Gray finish meets facility aesthetic requirements. Check for any specific load capacity constraints relative to the mounted equipment weight.

Selection Notes

Select this model when elevated mounting is required for HMI visibility. It is compatible with 4x4 inch CONCEPT and INLINE series enclosures. Consider the 36-inch height for ergonomic operator access. Verify floor space availability for the 4x4 inch footprint. Evaluate if caster mobility is necessary, noting that application limitations may apply.

Part Context

This component belongs to the Hoffman CONCEPT HMI and INLINE HMI accessory range. It serves as a structural support element rather than an enclosure itself. The design integrates with standard industrial control panel setups to elevate displays above machinery or workstations for improved accessibility.

Replacement Considerations

No public substitute part numbers are confirmed in available documentation. Verify compatibility with existing mounting hardware before replacing.