ATEX262616SS63

Overview

The ATEX262616SS63 is a hazardous location enclosure manufactured by Hoffman Enclosures, Inc. Constructed from Type 316 stainless steel with a #3 brushed finish, it measures 10.240 inches in length, 10.240 inches in width, and 6.300 inches in depth (260.10mm x 260.10mm x 160.02mm). The unit features a hinged door design and carries NEMA 4X ratings. It holds UL 508A, CUL, CSA C22.2, and CE approvals, ensuring compliance for use in classified hazardous areas requiring increased safety housing.

Feature Summary

• Constructed from Type 316 stainless steel with a #3 brushed finish for corrosion resistance
• Certified to meet ATEX Directive 2014/35/EU and IECEx standards for hazardous locations
• Features lift-off door hinges and removable gland plates for maintenance access
• Includes Type 316 stainless steel external fasteners throughout the assembly

Applications

• Housing electrical equipment in Zone 1 or Zone 2 hazardous areas
• Industrial environments requiring NEMA 4X protection against corrosion and water
• Applications mandated by ATEX and IECEx certification standards
• Control panels in chemical or petrochemical processing facilities

Procurement Notes

Verify that the specific installation site matches the enclosure's certified zone classification (e.g., Zone 1/2) and gas group requirements. Confirm that all internal components are compatible with the hazardous location rating. Ensure that cable entries utilize appropriate glands rated for the environment. Check for any required accessories such as mounting brackets or blanking plates not included in the base unit.

Selection Notes

Select this model when high corrosion resistance is critical due to the use of Type 316 stainless steel rather than standard 304 steel. The dimensions provide a compact footprint suitable for smaller control assemblies in tight hazardous spaces. Consider the brushed finish for aesthetic consistency if visible in public areas. Verify that the NEMA 4X rating aligns with the environmental exposure levels of the intended deployment site.

Part Context

This component belongs to the ZONEX HL Series, specifically designed for hazardous locations. It is part of Hoffman's portfolio of enclosures certified for use in explosive atmospheres. The series emphasizes safety through robust construction and strict adherence to international directives like ATEX and IECEx, distinguishing it from standard industrial enclosures used in non-hazardous zones.

Replacement Considerations

No direct substitute part numbers are publicly confirmed for this specific model. Replacement requires matching the exact hazardous location certifications, material grade (316 SS), and physical dimensions. Any alternative must hold equivalent ATEX and IECEx approvals for the same zone and gas group classifications.