CSD36246

Overview

The CSD36246 is a Concept Series wall-mount enclosure manufactured by Hoffman Enclosures, Inc. It features a single door design compliant with ANSI/IEEE Std 61 standards. Constructed from steel and finished in light gray powder coat, the unit provides NEMA Type 1 protection for indoor environments. The external dimensions are 36 inches in height, 24 inches in width, and 6 inches in depth (914 mm x 610 mm x 152 mm).

Feature Summary

• Single-door hinged construction designed for secure component housing.
• ANSI/IEEE Std 61 compliance ensures adherence to specific industrial safety and performance criteria.
• Light gray powder-coated steel finish offers corrosion resistance and aesthetic consistency.
• NEMA Type 1 rating protects against falling dirt and limited ingress of water.

Applications

• Indoor electrical panel assembly
• Control system housing
• Industrial automation equipment enclosures

Procurement Notes

Verify the exact model suffix when ordering, as variations may exist within the Concept series. Confirm that the required mounting hardware and internal accessories are sourced separately, as they are typically not included with the base enclosure unit. Ensure the installation environment meets the specified NEMA Type 1 requirements for indoor use only.

Selection Notes

Select this model for applications requiring standard indoor protection and ANSI compliance. Compare internal volume requirements against the fixed 6-inch depth. Consider stainless steel alternatives if outdoor or washdown conditions are anticipated, as this steel unit is rated for dry indoor locations only.

Part Context

This part belongs to the Hoffman Concept Series, which focuses on cost-effective, standard-sized enclosures for general-purpose industrial applications. The series emphasizes modular compatibility and standardized dimensions to facilitate quick deployment in control panel manufacturing.

Replacement Considerations

Direct replacements must match the 36x24x6 inch footprint and NEMA Type 1 rating. Verify hinge orientation and mounting hole patterns before substituting with units from other manufacturers to ensure physical compatibility with existing panels.