CTD304810

Overview

The Hoffman Enclosures, Inc. CTD304810 is a two-door wall-mounting enclosure constructed from mild steel with a gray powder-coated finish. It measures 30.00 inches in length, 48.00 inches in width, and 10.00 inches in depth (762.00mm x 1219.20mm x 254.00mm). The unit features a Type 12 rating for indoor use, providing protection against dust, falling dirt, and dripping non-corrosive liquids. The door thickness is 14 gauge, and the mounting size accommodates panels up to 28 1/2 inches by 46 1/2 inches.

Feature Summary

• Streamlined styling with flush quarter-turn latches for secure closure
• Continuously welded and ground smooth seams for structural integrity
• Simple hinge pin design with built-in captivation clip for easy installation

Applications

• Machine control applications
• Indoor electrical equipment housing
• Industrial automation panel enclosures

Procurement Notes

Verify the specific model suffix if environmental conditions require higher ratings than Type 12. Confirm that the internal component layout fits within the specified mounting dimensions of 28 1/2 inches by 46 1/2 inches. Ensure the installation environment remains indoors and free from corrosive agents, as the mild steel construction is not suitable for outdoor or harsh chemical exposure.

Selection Notes

Select this model when a robust, cost-effective solution for indoor machine control is required. The Type 12 rating makes it suitable for environments where dust and dripping liquids are present but corrosion is not a primary concern. Consider the 10-inch depth for adequate cable management and component spacing. Verify that the two-door configuration aligns with the need for separate access zones within the enclosure.

Part Context

This part belongs to the nVent Hoffman CONCEPT series, which is designed for industrial machine control applications. The series emphasizes streamlined aesthetics combined with durable construction. The CTD304810 represents a standard size option within this lineup, offering a balance between interior volume and footprint for typical control panel requirements.

Replacement Considerations

Direct replacements must match the 30x48x10 inch dimensions and Type 12 rating. Check for equivalent door configurations and latch mechanisms. Ensure the replacement material is compatible with the existing mounting infrastructure.