DG181AA

$176.70

Description：IC SW SPST-NCX2 30OHM TO100-10
Series：-

SKU:52a2f00c70ef Category: Analog Switches, Multiplexers, Demultiplexers Brand: Vishay Siliconix

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG181AA is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SW SPST-NCX2 30OHM TO100-10. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG181AA

Description：IC SW SPST-NCX2 30OHM TO100-10
Series：-
Mfr：Vishay Siliconix
Package：Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：30Ohm
Channel-to-Channel Matching (ΔRon)：-
Voltage - Supply, Single (V+)：-
Voltage - Supply, Dual (V±)：±15V
Switch Time (Ton, Toff) (Max)：150ns, 130ns
-3db Bandwidth：-
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：9pF, 6pF
Current - Leakage (IS(off)) (Max)：1nA
Crosstalk：-
Operating Temperature：-55°C ~ 125°C (TA)
Mounting Type：Through Hole
Package / Case：TO-100-10 Metal Can
Supplier Device Package：TO-100-10
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG181AA

DG181AA

Analog Switches, Multiplexers, Demultiplexers Overview

The DG181AA is a precision dual single-pole, single-throw (SPST) analog switch manufactured by Vishay Siliconix. It features two independent channels with a maximum on-resistance of 30 ohms and an operating temperature range from -55°C to +125°C. The device utilizes n-channel JFET transistors and a TTL-compatible bipolar driver for fast switching. Key electrical parameters include a typical source off leakage current of 0.05 nA at room temperature and a drain off leakage current of 0.04 nA. Switching times are specified with a maximum turn-on time of 150 ns and a maximum turn-off time of 130 ns.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Provides constant on-resistance over the entire analog signal range
Features low leakage current and low crosstalk characteristics
Includes fault protection capabilities for high voltage blocking
Designed for high precision applications requiring low distortion

Analog Switches, Multiplexers, Demultiplexers Applications

Audio switching circuits
Video signal routing
Sample-and-hold systems
Data acquisition front ends

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels. Confirm the specific suffix 'AA' corresponds to the required military-grade temperature range (-55°C to +125°C). Check for RoHS compliance status as indicated in official documentation. Validate package integrity upon receipt to ensure no damage to the metal can housing.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a 30-ohm on-resistance is required for SPST switching applications. Ensure the design supports dual supply voltages up to ±15V. Verify that the TTL-compatible logic levels match the system control interface. Consider the TO-100-10 metal can package constraints for thermal management and physical footprint.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the DG180/181/182 series of high-speed drivers with dual SPST JFET switches. The DG181 variant specifically offers a 30-ohm on-resistance, distinguishing it from the 10-ohm DG180 and 75-ohm DG182 models. All variants share similar architectural features including low leakage and high bandwidth capabilities.