DG211CJ+

$11.51

Description：IC SWITCH SPST-NCX4 175OHM 16DIP
Series：-

SKU:d6fb7c49e4fe Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG211CJ+ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NCX4 175OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG211CJ+

Description：IC SWITCH SPST-NCX4 175OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：175Ohm
Channel-to-Channel Matching (ΔRon)：-
Voltage - Supply, Single (V+)：-
Voltage - Supply, Dual (V±)：±4.5V ~ 18V
Switch Time (Ton, Toff) (Max)：1µs, 500ns
-3db Bandwidth：-
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：5pF, 5pF
Current - Leakage (IS(off)) (Max)：5nA
Crosstalk：-90dB @ 100kHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG211CJ+

DG211CJ+

Analog Switches, Multiplexers, Demultiplexers Overview

The DG211CJ+ is a quad single-pole single-throw (SPST) analog switch manufactured by Analog Devices Inc./Maxim Integrated. It features a monolithic, low-power CMOS design compatible with TTL and CMOS logic. The device operates on dual power supplies ranging from ±4.5V to ±18V. Electrical specifications include a maximum drain-source ON-resistance of 175 Ohms at ±10V. Switching performance guarantees a maximum turn-on time of 1000ns and a maximum turn-off time of 500ns. The component is housed in a 16-pin Plastic DIP package and supports an operating temperature range of 0°C to +70°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Guaranteed break-before-make switching prevents signal overlap during transitions.
Nonlatching behavior ensures safe operation even if power supplies are disconnected while input signals remain connected.
Eliminates the need for a separate VL supply required by original manufacturer versions.

Analog Switches, Multiplexers, Demultiplexers Applications

Winchester Disk Drives
Test Equipment
Communications Systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify that the ordering suffix CJ+ specifically denotes the Plastic DIP package variant. Confirm the temperature grade corresponds to the commercial range of 0°C to +70°C. Ensure the datasheet revision matches the current manufacturing specification. Cross-reference the part number against official distributor catalogs to confirm availability status. Validate RoHS compliance documentation prior to final procurement decisions.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when break-before-make timing is critical for system stability. Choose the DG211CJ+ over the DG201A variant if higher switching speeds are not required but lower cost or specific package availability is needed. Verify that the ±18V maximum supply voltage aligns with the target circuit design. Consider the 175 Ohm ON-resistance limit when designing for low-voltage signal paths.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the DG201A/DG211 family of quad SPST CMOS analog switches. The DG211 series is distinguished from the DG201A primarily by its slower switching speeds. Both devices share identical pinouts and general electrical characteristics, differing mainly in dynamic performance metrics. The CJ+ designation identifies the specific through-hole plastic DIP packaging option within this product line.