ChipApex | Global Electronic Components Supplier
EL2470CN
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：IC OPAMP CFA 4 CIRCUIT 14DIP
- Series：-
- Mfr：Elantec
- Package：Bulk
- Amplifier Type：Current Feedback
- Number of Circuits：4
- Output Type：Push-Pull
- Slew Rate：800V/µs
- Gain Bandwidth Product：-
- Current - Input Bias：4 µA
- Voltage - Input Offset：2.5 mV
- Current - Supply：1mA (x4 Channels)
- Current - Output / Channel：55 mA
- Voltage - Supply Span (Min)：3 V
- Voltage - Supply Span (Max)：12 V
- Operating Temperature：-40°C ~ 85°C (TA)
- Grade：-
- Qualification：-
- Mounting Type：Through Hole
- Package / Case：14-DIP (0.300", 7.62mm)
- Supplier Device Package：14-PDIP
- -3db Bandwidth：70 MHz
Download product information
Overview
The EL2470CN is a quad current-feedback operational amplifier from the Elantec EL2xxx series. It provides a -3dB bandwidth of 70MHz at unity gain while consuming only 1mA of supply current per amplifier. The device supports dual supplies from ±1.5V to ±6V or single supplies from +3V to +12V. It delivers an output drive current of 55mA with voltage swings to ±4V on ±5V supplies. Key electrical parameters include a slew rate of 800V/µs and differential gain/phase errors of 0.15%/0.15° into a 150Ω load.
Feature Summary
- Quad topology offering four independent amplifiers in a single package
- High-speed current-mode feedback architecture for video and cable applications
- Low power consumption with 1mA supply current per channel
- Capable of large output drive currents up to 55mA
Applications
- HDSL amplifiers
- Video amplifiers
- Cable drivers
- RGB amplifiers
- Test equipment amplifiers
Procurement Notes
Verify the manufacturer source, as Intersil acquired Elantec Semiconductor. Confirm the specific suffix 'CN' denotes the correct package type and temperature range. Check for RoHS compliance status and ensure the component matches the required quad configuration for your circuit design.
Selection Notes
Select this component when multiple low-power, high-bandwidth channels are required. It is suitable for designs needing 70MHz bandwidth with minimal quiescent current. Consider the EL2270 if only two channels are needed, or the EL2170 for higher single-channel current drive capabilities.
Part Context
The EL2470CN belongs to the EL2xxx family of current-feedback operational amplifiers. This family includes single (EL2170), dual (EL2270), and quad (EL2470) variants. These devices share similar electrical characteristics, differing primarily in the number of amplifiers per package and specific pinout configurations.
Replacement Considerations
Direct substitutes within the same family include the EL2270 for dual-channel needs or the EL2170 for single-channel applications. Verify pin compatibility and package dimensions before replacing.
