EL5292CS

Description：IC OPAMP CFA 2 CIRCUIT 8SOIC
Series：EL5292
Mfr：Renesas Electronics Corporation
Package：Tube

SKU:71bbb64ef4d4 Category: Instrumentation, Op Amps, Buffer Amps Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

EL5292CS is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC OPAMP CFA 2 CIRCUIT 8SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for EL5292CS

Description：IC OPAMP CFA 2 CIRCUIT 8SOIC
Series：EL5292
Mfr：Renesas Electronics Corporation
Package：Tube
Amplifier Type：Current Feedback
Number of Circuits：2
Output Type：-
Slew Rate：2300V/µs
Gain Bandwidth Product：-
Current - Input Bias：4 µA
Voltage - Input Offset：1 mV
Current - Supply：6mA (x2 Channels)
Current - Output / Channel：120 mA
Voltage - Supply Span (Min)：5 V
Voltage - Supply Span (Max)：10 V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：8-SOIC (0.154", 3.90mm Width)
Supplier Device Package：8-SOIC
-3db Bandwidth：600 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for EL5292CS

EL5292CS

Instrumentation, Op Amps, Buffer Amps Overview

The EL5292CS is a dual current feedback amplifier featuring a 600MHz -3dB bandwidth and 6mA supply current per amplifier. It operates on single or dual supplies from 5V to 10V, with an output swing extending to within 1V of the rails. The device provides high output drive capability of ±95mA minimum and includes low differential gain (0.015%) and phase error (0.04°). It is housed in an industry-standard 8-lead SOIC package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

High-speed current feedback topology providing consistent bandwidth across varying closed-loop gains
Low power consumption suitable for portable and battery-powered equipment
Capable of driving heavy loads including 50Ω isolation transformers
Optimized video performance with minimal differential gain and phase distortion

Instrumentation, Op Amps, Buffer Amps Applications

Video amplifiers
Cable drivers
RGB amplifiers
Test equipment
Current to voltage converters

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific manufacturer origin as Intersil products are now part of Renesas Electronics. Confirm the datasheet revision FN7192.1 matches your design requirements. Ensure proper ESD handling procedures are followed during assembly due to the sensitivity of the semiconductor components.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when high bandwidth and low power consumption are critical. It is ideal for applications requiring significant output drive current into low impedance loads. Consider the EL5292A variant if hardware enable/disable functionality is required for power management.

Instrumentation, Op Amps, Buffer Amps Part Context

This device belongs to the EL5292 series of dual current feedback amplifiers. It shares architectural similarities with the EL5192 single-channel version and the EL5392 triple-channel version. The product line offers variations in bandwidth and supply current to suit different speed and power constraints.