Instrumentation, Op Amps, Buffer Amps EL5364IU product image

EL5364IU

$1.22
  • Description:IC OPAMP CFA 3 CIRCUIT 16QSOP
  • Series:EL5364
  • Mfr:Elantec
  • Package:Tube

SKU:f6d112bf1894 Category: Brand:

  
  • Quantity
    • -
    • +
  •    
ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:[email protected]
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

EL5364IU is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Elantec. Its product description is IC OPAMP CFA 3 CIRCUIT 16QSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for EL5364IU

  • Description:IC OPAMP CFA 3 CIRCUIT 16QSOP
  • Series:EL5364
  • Mfr:Elantec
  • Package:Tube
  • Amplifier Type:Current Feedback
  • Number of Circuits:3
  • Output Type:-
  • Slew Rate:4200V/µs
  • Gain Bandwidth Product:-
  • Current - Input Bias:2 µA
  • Voltage - Input Offset:1.5 mV
  • Current - Supply:3.5mA (x3 Channels)
  • Current - Output / Channel:140 mA
  • Voltage - Supply Span (Min):5 V
  • Voltage - Supply Span (Max):10 V
  • Operating Temperature:-40°C ~ 85°C (TA)
  • Grade:-
  • Qualification:-
  • Mounting Type:Surface Mount
  • Package / Case:16-SSOP (0.154", 3.90mm Width)
  • Supplier Device Package:16-QSOP
  • -3db Bandwidth:600 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for EL5364IU

EL5364IU

Instrumentation, Op Amps, Buffer Amps Overview

The EL5364IU is a high-speed operational amplifier manufactured by Renesas Electronics, formerly Intersil. It features three independent channels within a single package, designed for applications requiring wide bandwidth and fast transient response. The device operates with a supply voltage range of 2.5 V to 12 V per channel or 5 V to 6 V total. Key electrical specifications include a slew rate of 4.2 kV/µs, an input offset voltage of 5 mV, and a common-mode rejection ratio of 50 dB. It exhibits low input voltage noise density of 2.1 nV/√Hz and input current noise density of 13 pA. The power supply rejection ratio is 65 dB, with a typical operating supply current of 4.2 mA. The component is housed in a QSOP-16 package and supports an operating temperature range from -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

  • Triple-channel architecture providing three independent high-speed amplifiers in one package
  • Wide bandwidth capability suitable for demanding signal processing tasks
  • Low noise performance with specified input voltage and current noise densities
  • Robust power supply rejection and high slew rate for accurate signal reproduction

Instrumentation, Op Amps, Buffer Amps Applications

  • Video signal processing circuits
  • Data acquisition systems requiring high speed
  • Test and measurement instrumentation

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix (e.g., T7, T13) for packaging requirements such as reel or cut tape quantities. Confirm RoHS compliance status through official documentation. Check for moisture sensitivity levels if handling requires controlled storage conditions. Ensure the supplier provides valid traceability documents for quality assurance purposes.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when triple-channel high-speed amplification is required in a compact form factor. Consider the 4.2 kV/µs slew rate and 850 MHz bandwidth for video or RF applications. Evaluate the 2.5 V to 12 V supply range against system power constraints. Compare noise specifications against other op-amps if signal integrity is critical.

Instrumentation, Op Amps, Buffer Amps Part Context

The EL5364 belongs to the EL5364 series of high-speed operational amplifiers produced by Renesas Electronics. This series is characterized by its use of complementary feedback amplifier technology (CFAW). The device integrates three channels to reduce board space compared to using individual dual or single op-amps. It is part of the broader portfolio of analog signal processing components offered by the manufacturer.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Check for direct pin-compatible replacements within the EL5364 family, such as the EL5364I. Verify that any substitute maintains the same QSOP-16 package and electrical characteristics like slew rate and bandwidth. Consult official substitution guides for approved alternatives.

EL5364IUEL5364IU
$1.22
Buy Now

Recent News