F1200NBGI

RF Amplifiers Overview

The F1200NBGI is a general-purpose RF amplifier IC designed for low intermediate frequency applications. It operates within a frequency range of 50MHz to 160MHz and utilizes a 28-VFQFPN (5x5) surface-mount package with an exposed pad. The device requires a supply voltage between 4.75V and 5.25V, drawing a typical supply current of 110mA. Key electrical specifications include a gain of 22dB, a noise figure of 2.6dB, and a 1dB compression point (P1dB) of 19.4dBm at a test frequency of 100MHz. The component is RoHS3 compliant and classified under MSL level 1.

RF Amplifiers Feature Summary

• Integrated low IF RF amplifier architecture optimized for general-purpose wireless communication systems
• High linearity performance with specified P1dB and gain characteristics for signal integrity
• Low noise figure design suitable for sensitive receiver front-end applications
• Compact 28-lead VFQFPN package with exposed thermal pad for efficient PCB integration

RF Amplifiers Applications

• GPS receiver modules
• Wireless local loop systems
• General purpose RF front-end stages
• Low intermediate frequency downconversion circuits

RF Amplifiers Procurement Notes

Verify component authenticity through authorized Renesas distributors or certified partners. Confirm the specific revision status and RoHS3 compliance documentation prior to integration. Note that availability may be limited as the part status indicates discontinuation in certain channels. Ensure proper handling procedures for the exposed pad package are followed during assembly to maintain thermal and electrical performance standards.

RF Amplifiers Selection Notes

Select this component when a dedicated low IF amplifier is required for the 50MHz to 160MHz band. Consider the 22dB gain and 2.6dB noise figure for system link budget calculations. Evaluate the 110mA supply current against power constraints. The 28-VFQFPN footprint must match the target PCB layout. Verify compatibility with the 5V supply rail and ensure thermal management strategies accommodate the exposed pad design.

RF Amplifiers Part Context

The F1200NBGI belongs to the F1200 family of RF products from Renesas Electronics Corporation. This series focuses on silicon germanium (SiGe) based solutions for wireless communications. The NBGI suffix denotes the specific package type and pinout configuration. It complements other RF components like mixers in complete receiver chain designs, providing amplification before or after frequency conversion stages.

RF Amplifiers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Check Renesas official resources for potential obsolescence notices or recommended upgrades. Direct pin-to-pin replacements should only be used if verified by manufacturer cross-reference lists.