F44T124GVP

Overview

The Hoffman F44T124GVP is a straight section wireway designed for indoor electrical cable management. It features a NEMA Type 1 rating and measures 4 inches by 4 inches in cross-section with a length of 24 inches. Constructed from 16/14 gauge steel, it includes a flat cover with keyhole screw slots for flush mounting. The unit utilizes a lay-in design, allowing complete access to the interior on one side for easy wire installation. The exterior finish is ANSI 61 gray polyester powder paint, providing corrosion resistance suitable for environments where dust, dirt, oil, and water are not severe hazards.

Feature Summary

• Lay-in flat cover design allows for open-top assembly and easy wire insertion
• Keyhole screw slots on covers enable secure flush mounting
• NEMA Type 1 rating protects against falling dirt and limited contact
• Steel construction with gray polyester powder coat finish

Applications

• Enclosing wire and cable in indoor wireway runs
• Protecting electrical wiring in controlled industrial environments
• Cable management where dust and dirt are present but moisture is minimal

Procurement Notes

Verify that the required NEMA Type 1 protection level matches the installation environment's exposure to dust and incidental contact. Confirm that the 4x4 inch cross-section accommodates the total cable bundle diameter without exceeding fill capacity guidelines. Ensure the 24-inch length aligns with the specific run requirements between junction points or equipment entries. Check that the gray polyester finish is compatible with the ambient conditions to prevent premature degradation.

Selection Notes

Select this model when a straight run of enclosed cabling is needed without the complexity of hinged covers. The lay-in style is preferred for frequent modifications or inspections due to its open-side accessibility. Consider the steel gauge for mechanical durability relative to the mounting surface load. The flat cover profile is suitable for applications requiring a low-profile aesthetic or tight clearance constraints compared to hinged alternatives.

Part Context

This component belongs to the nVent Hoffman F40FC Lay-In Straight Section series. It is part of a modular wireway system that includes various lengths, sizes, and fittings to create continuous cable routing paths. The F44T124GVP serves as a standard linear segment within these systems, designed to interlock or connect with other Type 1 wireway components to form protected pathways for electrical conductors.

Replacement Considerations

Direct substitutes include other manufacturers' NEMA Type 1 straight wireways with identical 4x4x24 inch dimensions and lay-in flat cover designs. Verify that replacement units maintain the same steel gauge and UL 870 listing if regulatory compliance is mandatory. Ensure the mounting hole pattern on the replacement cover matches existing infrastructure to avoid modification.