F88T12HC

Overview

The Hoffman Enclosures Inc. F88T12HC is a hinged-cover wiring trough constructed from 14-gauge steel with an ANSI 61 gray polyester powder finish. It measures 8 inches in width, 8 inches in depth, and 12 inches in length. The unit features continuously welded ends and seams that are ground smooth, eliminating holes or knockouts. It utilizes butt hinges and external screw clamps for secure closure. The enclosure provides protection against dust, dirt, and light splashing water, meeting NEMA Type 12, IP55, UL 870, CSA, and JIC standards.

Feature Summary

• Hinged lid design allows for easy access to internal wiring and cable management.
• Continuously welded and ground smooth construction ensures a seamless exterior without holes or knockouts.
• Oil-resistant gasket and adhesive seal the enclosure to protect against environmental contaminants.
• Constructed from durable 14-gauge steel with a corrosion-resistant gray polyester powder coating.

Applications

• Protecting wire and cable distribution systems in industrial environments.
• Safeguarding junctions and terminations from dust, dirt, and oil.
• Indoor and outdoor cable routing where NEMA Type 12 protection is required.

Procurement Notes

Verify the specific dimensional requirements (8x8x12 inches) and material specifications (14-gauge steel) against project drawings. Confirm that the NEMA Type 12 and IP55 ratings align with the environmental conditions of the installation site. Ensure compatibility with existing conduit and cable entry methods, as this model lacks pre-drilled knockouts. Check for any additional accessories such as mounting hardware or internal dividers if not included in the standard package.

Selection Notes

Select this model when continuous protection for wireways is needed without the need for field-drilled openings. The hinged cover facilitates maintenance and inspection compared to fixed covers. Consider the 14-gauge steel thickness for structural rigidity in high-traffic areas. The gray finish is suitable for general industrial aesthetics. Verify that the 12-inch length meets the span requirements between support points.

Part Context

This component belongs to the Hoffman Feed-Through series of straight section trunking. It is designed specifically for wireway applications rather than general-purpose equipment enclosures. The series focuses on protecting cable runs in both indoor and outdoor settings. It complements other Hoffman wiring accessories and junction boxes within electrical distribution networks.

Replacement Considerations

Direct substitutes must match the 8x8x12 inch dimensions and NEMA Type 12 rating. Verify that alternative models also feature hinged covers and welded seams. Ensure the replacement material is 14-gauge steel with similar corrosion resistance. Cross-reference UL 870 and CSA approvals to maintain compliance with local electrical codes.