F88T172GVP

Overview

The Hoffman F88T172GVP is a Type 1 straight section lay-in wireway with an 8-inch width and 8-inch height. Constructed from 14/16 gauge steel, it features an ANSI 61 gray polyester powder coated finish. The unit measures 72 inches in length and is designed for indoor use. It complies with UL 870 and CUL standards, providing a completely open side for easy wire installation.

Feature Summary

• Lay-in design allows wires to be placed directly into the channel without threading through pre-existing openings.
• Completely open on one side to facilitate rapid wire and cable insertion during installation.
• Type 1 construction provides protection against falling dirt in indoor environments where dust, oil, and water are not severe hazards.

Applications

• Enclosing wire and cable in indoor wireway runs
• Electrical wiring protection in areas with minimal environmental hazards
• Industrial control panel wiring management

Procurement Notes

Verify that the required NEMA Type 1 rating aligns with the specific environmental conditions of the installation site. Confirm that the 8x8 inch cross-section and 72-inch length meet the spatial requirements. Ensure compatibility with other Hoffman F88 series fittings and accessories for a complete system integration.

Selection Notes

Select this model when a straight run of wireway is needed for indoor applications with low contamination risks. The 8-inch by 8-inch dimensions accommodate larger cable bundles compared to narrower profiles. The lay-in feature reduces labor time during installation compared to traditional conduit systems requiring wire pulling.

Part Context

This component belongs to the Hoffman F88 series of lay-in flat-cover wireways. These products are engineered for efficient cable management in electrical distribution systems. The series offers various sizes and lengths to suit different routing needs while maintaining consistent structural integrity and finish quality across the product line.

Replacement Considerations

No public confirmed substitute part numbers are available in the provided documentation. Verify dimensional compatibility if considering alternative manufacturers' wireways for retrofitting existing installations.

FAQ

What is the primary benefit of the lay-in design?

The lay-in design allows wires to be inserted directly into the open side of the wireway, simplifying installation and reducing labor time compared to systems requiring wires to be pulled through closed conduits.

Is this wireway suitable for outdoor use?

No, the Type 1 rating indicates it is intended for indoor use only, protecting against falling dirt but not against water or severe environmental conditions.