FBA04VA600AB-00

Chip Ferrite Bead Overview

The FBA04VA600AB-00 is a leaded ferrite bead inductor from the FB series by Taiyo Yuden. It features an axial termination type with a 60 Ohm impedance measured at 100 MHz. The component supports a maximum DC current of 7 A and has a maximum DC resistance of 1 mOhms. It operates within a temperature range of -25°C to +85°C. The physical dimensions are 3.5 mm in diameter and 6.0 mm in length.

Chip Ferrite Bead Feature Summary

• Provides electromagnetic interference suppression through high impedance characteristics at specific frequencies.
• Designed for through-hole mounting using axial leads for reliable circuit integration.
• Capable of handling high direct current loads without significant performance degradation.

Chip Ferrite Bead Applications

• Noise filtering in power supply lines
• Signal integrity enhancement in digital circuits
• Electromagnetic compatibility improvement in electronic assemblies

Chip Ferrite Bead Procurement Notes

Verify end-of-life status as this part may be discontinued. Confirm RoHS compliance details via official documentation. Check for valid replacement options if sourcing new units is not feasible. Ensure storage conditions meet manufacturer specifications to maintain component integrity prior to assembly.

Chip Ferrite Bead Selection Notes

Select this component when a 60 Ohm impedance at 100 MHz is required for axial ferrite bead applications. Ensure the circuit design accommodates the 7 A current rating and 1 mOhms DC resistance. Verify that the axial package fits the PCB layout constraints and that the operating temperature range meets environmental requirements.

Chip Ferrite Bead Part Context

This component belongs to the FB series of leaded ferrite bead inductors manufactured by Taiyo Yuden. These components are designed for general-purpose noise suppression in electronic circuits. The axial form factor allows for easy insertion into printed circuit boards, providing a robust solution for EMI reduction in various consumer and industrial electronics.

Chip Ferrite Bead Replacement Considerations

FBA04VA600VB-00

Chip Ferrite Bead FAQ

What is the test frequency for the impedance specification?

The impedance of 60 Ohms is specified at a test frequency of 100 MHz.

What is the maximum DC current rating?

The maximum DC current rating is 7 A.