FHP3430IM14X

$2.41

Description：IC OPAMP VFB 4 CIRCUIT 14SOIC
Series：-
Mfr：onsemi
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:7343a2f5c66f Category: Instrumentation, Op Amps, Buffer Amps Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

FHP3430IM14X is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists onsemi. Its product description is IC OPAMP VFB 4 CIRCUIT 14SOIC. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for FHP3430IM14X

Description：IC OPAMP VFB 4 CIRCUIT 14SOIC
Series：-
Mfr：onsemi
Package：Tape & Reel (TR),Cut Tape (CT)
Amplifier Type：Voltage Feedback
Number of Circuits：4
Output Type：Rail-to-Rail
Slew Rate：110V/µs
Gain Bandwidth Product：60 MHz
Current - Input Bias：1.8 µA
Voltage - Input Offset：1 mV
Current - Supply：2.5mA (x4 Channels)
Current - Output / Channel：100 mA
Voltage - Supply Span (Min)：2.7 V
Voltage - Supply Span (Max)：12 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Surface Mount
Package / Case：14-SOIC (0.154", 3.90mm Width)
Supplier Device Package：14-SOIC
-3db Bandwidth：170 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for FHP3430IM14X

FHP3430IM14X

Instrumentation, Op Amps, Buffer Amps Overview

The FHP3430IM14X is a quad, high-speed, voltage feedback operational amplifier manufactured by onsemi. It operates from supply voltages ranging from 2.7V to 12V and features rail-to-rail input and output capabilities. The device provides a typical gain-bandwidth product of 60MHz and a slew rate of 110V/µs at ±5V supplies. Each channel consumes 2.5mA of supply current while delivering ±100mA of linear output current. It includes short-circuit protection and is housed in a 14-lead SOIC package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Rail-to-rail input and output performance for maximum dynamic range
High slew rate and bandwidth suitable for demanding video applications
Low power consumption with 2.5mA supply current per amplifier
Robust output drive capability supporting up to four video loads

Instrumentation, Op Amps, Buffer Amps Applications

A/D driver circuits
Active filters
CCD imaging systems
Video drivers
Coaxial cable drivers

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific ordering suffix IM14X corresponds to the SOIC-14 package configuration. Confirm that the RoHS compliant status applies to the specific manufacturing lot. Ensure the operating temperature range requirements align with the specified -40°C to +85°C limits before finalizing procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when a quad amplifier configuration is required for space-constrained designs. It is appropriate for applications needing rail-to-rail signal swing and high output current drive. Consider the 60MHz gain-bandwidth product and 110V/µs slew rate for high-frequency signal processing tasks.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the FHP3130, FHP3230, and FHP3430 family of amplifiers. While the FHP3130 is a single-channel device and the FHP3230 is dual-channel, the FHP3430 integrates four independent channels into one package. All variants share identical electrical characteristics and pinout configurations for their respective channels.