FO7HSCDM12.0-T1

Oscillators Overview

The FO7HSCDM12.0-T1 is a standard surface-mount clock oscillator manufactured by Fox Electronics. It operates at a fixed frequency of 12 MHz with a frequency stability of 25.0 ppm. The device supports a supply voltage of 3.3V with a tolerance of ±10% and utilizes HCMOS output logic. Designed for industrial applications, it functions within a temperature range of -40°C to +85°C. The component is housed in a compact 7 mm x 5 mm SMD package, suitable for space-constrained circuit designs requiring reliable timing signals.

Oscillators Feature Summary

• HCMOS output interface compatible with standard digital logic inputs
• Industrial-grade wide temperature operation from -40°C to +85°C
• Compact 7x5 mm surface-mount footprint for efficient PCB layout

Oscillators Applications

• Industrial edge gateway hardware design
• Microcontroller (MCU) clock source generation
• PHY clock signal provision in network equipment
• General-purpose digital circuit timing reference

Oscillators Procurement Notes

Verify the specific suffix 'T1' corresponds to the Tape & Reel packaging format when ordering. Confirm that the 3.3V supply requirement aligns with the target system's power rail specifications. Ensure the 25 ppm stability meets the timing accuracy requirements of the application. Check that the 7x5 mm package dimensions fit within the designated footprint on the printed circuit board without clearance issues.

Oscillators Selection Notes

Select this component when a 12 MHz HCMOS clock signal is required for industrial environments. It serves as a direct replacement for older F4 series oscillators like the F4500 or F4400 without necessitating PCB redesign due to identical 7x5 mm packaging. Consider this part for designs prioritizing low standby current and robust performance across wide temperature variations compared to consumer-grade alternatives.

Oscillators Part Context

This oscillator belongs to the Fox FO7HS series, which features a 7050 (7x5 mm) SMD package. The series is designed to replace legacy F4 series components while offering improved parameters such as lower standby current. The FO7HS family supports various supply voltages including 1.8V, 2.5V, and 3.3V, with the FO7HSCDM12.0-T1 specifically configured for 3.3V operation.

Oscillators Replacement Considerations

The FO7HSCDM12.0-T1 is a direct pin-compatible substitute for Fox Electronics F4500, F4400, and F4100 series oscillators. No PCB layout changes are required when upgrading from these legacy parts due to the shared 7x5 mm package dimensions.