FODM3011R2V

$0.28

Description：OPTOISOLTR 3.75KV TRIAC 1CH 4SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:ee4feb16dc33 Category: Triac, SCR Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

FODM3011R2V is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISOLTR 3.75KV TRIAC 1CH 4SMD. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for FODM3011R2V

Description：OPTOISOLTR 3.75KV TRIAC 1CH 4SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Output Type：Triac
Zero Crossing Circuit：No
Number of Channels：1
Voltage - Isolation：3750Vrms
Voltage - Off State：250 V
Static dV/dt (Min)：10V/µs (Typ)
Current - LED Trigger (Ift) (Max)：10mA
Current - On State (It (RMS)) (Max)：70 mA
Current - Hold (Ih)：300µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：60 mA
Operating Temperature：-40°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：4-SMD, Gull Wing
Supplier Device Package：4-SMD
Approval Agency：BSI, CSA, UL, VDE

Triac, SCR Output Optoisolators datasheet and documents for FODM3011R2V

FODM3011R2V

Triac, SCR Output Optoisolators Overview

The FODM3011R2V is a single-channel Triac output optocoupler manufactured by onsemi. It features a Mini-Flat surface-mount package with four pins. The device provides an isolation voltage of 3750 Vrms between the input and output sections. Key electrical parameters include a maximum forward current of 60 mA, a typical forward voltage of 1.2 V, and a power dissipation rating of 300 mW. The output Triac supports a peak repetitive off-state voltage (VDRM) of 250 V and a maximum continuous output current of 70 mA. The component operates within a temperature range of -40°C to +100°C and does not include a zero-crossing circuit.

Triac, SCR Output Optoisolators Feature Summary

Random-phase Triac driver output for AC load control
High insulation voltage capability of 3750 Vrms
Compact Mini-Flat surface-mount packaging

Triac, SCR Output Optoisolators Applications

AC motor speed control circuits
Solid state relay drivers
Lighting dimmer applications

Triac, SCR Output Optoisolators Procurement Notes

Verify component status as obsolete or end-of-life before procurement planning. Confirm availability through authorized distributors or secondary markets. Check RoHS compliance status and specific ordering suffixes for tape and reel configurations. Ensure replacement strategies are in place due to discontinuation risks.

Triac, SCR Output Optoisolators Selection Notes

Select this component for applications requiring random-phase triggering without zero-crossing detection. Consider the 250 V off-state voltage limit for low-voltage AC loads. Evaluate the 70 mA continuous current capacity against load requirements. Verify compatibility with the Mini-Flat footprint during PCB layout design.

Triac, SCR Output Optoisolators Part Context

This part belongs to the FODM30 series of Triac output optocouplers from onsemi. These devices are designed for isolating control signals from high-voltage AC lines. The series typically offers various package options and voltage ratings to suit different industrial and consumer electronics applications.