FTA-150-104-HS

Power Line Filter Modules Overview

The FTA-150-104-HS is a three-phase (Wye) EMC/EMI power line filter manufactured by Cosel USA, Inc. It features a chassis mount design with screw termination for secure installation. The unit is rated for 500 VAC and supports a continuous current of 150 A at operating frequencies of 50 Hz and 60 Hz. Key electrical specifications include a capacitance of 100 nF and a leakage current of 3.5 mA. The component complies with UL, CSA, DIN, and ENEC standards.

Power Line Filter Modules Feature Summary

• Designed for high-attenuation common mode noise suppression in the 150 kHz to 1 MHz range
• Three-phase Wye configuration suitable for industrial power line filtering
• Chassis mount construction with screw terminals for robust mechanical connection

Power Line Filter Modules Applications

• Industrial machinery requiring EMI/EMC compliance
• Three-phase power distribution systems
• Equipment sensitive to high-frequency noise interference

Power Line Filter Modules Procurement Notes

Verify that the specific application voltage does not exceed the 500 VAC rating and that the load current remains within the 150 A limit. Confirm that the chassis mounting method aligns with the screw termination type. Ensure compatibility with 50 Hz or 60 Hz supply frequencies. Check for required certifications such as UL or CSA based on regional deployment regulations.

Power Line Filter Modules Selection Notes

Select this model when high current capacity of 150 A is required for three-phase applications. The 100 nF capacitance provides specific attenuation characteristics for common mode noise. Consider the chassis mount style if panel integration is preferred over PCB mounting. Verify that the 3.5 mA leakage current is acceptable for the connected equipment safety requirements.

Power Line Filter Modules Part Context

This component belongs to the Cosel FTA series of power line filters. The series is engineered for general-purpose noise filtration in industrial environments. The FTA-150-104-HS variant specifically addresses high-current needs with enhanced attenuation capabilities compared to lower-rated models in the same family.

Power Line Filter Modules Replacement Considerations

Direct substitutes must match the 150 A current rating, 500 VAC voltage rating, and three-phase Wye topology. Verify that alternative components offer comparable attenuation in the 150 kHz to 1 MHz range and compatible chassis mounting dimensions.