G40H100CTFW

Diode Arrays Overview

The G40H100CTFW is a Trench Schottky Rectifier manufactured by Diodes Incorporated, rated for a maximum repetitive peak reverse voltage of 100 V and a maximum average rectified output current of 40 A at a case temperature of 30°C. It utilizes ITO-220(S)AB packaging and supports an operating junction temperature range from -55°C to +175°C. The device exhibits a typical forward voltage drop of 0.65 V at 20 A and 25°C, with a non-repetitive peak surge current capability of 250 A. Its thermal resistance is typically 3°C/W (junction-to-case).

Diode Arrays Feature Summary

• High junction temperature capability supporting operation up to 175°C.
• Negligible switching losses due to Trench Schottky technology.
• Qualified according to AEC-Q101 Rev_D standards.
• Halogen and Antimony Free "Green" device compliant with RoHS directives.

Diode Arrays Applications

• High frequency miniature switch mode adapters
• On-board DC-DC converters
• High frequency inverters

Diode Arrays Procurement Notes

Verify the specific ordering suffix against official Diodes Incorporated documentation to confirm package type and packing quantity. Confirm that the component meets all applicable environmental compliance requirements for the intended deployment region. Ensure proper handling procedures are followed during installation to maintain device integrity.

Diode Arrays Selection Notes

Select this component for applications requiring high efficiency and low forward voltage drop in high-frequency environments. Evaluate thermal management requirements based on the specified thermal resistance values. Ensure the operating environment remains within the defined junction temperature limits to guarantee long-term reliability and performance stability.

Diode Arrays Part Context

This part belongs to the Trench Schottky Rectifier series from Diodes Incorporated. It is designed for general-purpose rectification in power supply circuits where low conduction losses and fast switching speeds are critical. The ITO-220(S)AB package provides robust mechanical support and efficient heat dissipation for through-hole mounting applications.

Diode Arrays Replacement Considerations

Consult official manufacturer substitution guides for verified alternatives. Ensure any replacement matches the 100V reverse voltage, 40A current rating, and ITO-220(S)AB package dimensions.

Diode Arrays FAQ

What is the maximum non-repetitive peak surge current?

The maximum non-repetitive peak surge current is 250 A for an 8.3ms single half sine-wave superimposed on rated load.

Is the G40H100CTFW qualified for automotive applications?

Yes, the qualification is performed according to the AEC-Q101 Rev_D standard.

What is the typical junction capacitance?

The typical junction capacitance is 1370 pF, measured at 1.0MHz and an applied voltage of 4.0V DC.