HCPL-2630

Logic Output Optoisolators Overview

The HCPL-2630 is a dual-channel high-speed optocoupler from the Broadcom HCPL series. It features a DC input and open collector logic output with Schottky clamping for enhanced performance. The device provides an isolation voltage of 3750 Vrms and a common-mode transient immunity (CMTI) of 5 kV/µs. Key electrical parameters include a data rate of 10 Mb/s, typical rise time of 24 ns, and fall time of 10 ns. It operates within a temperature range of -40°C to +85°C.

Logic Output Optoisolators Feature Summary

• High-speed signal transmission capability supporting up to 10 Mb/s data rates
• Integrated Schottky clamping on the phototransistor output to minimize storage time
• Robust noise immunity characterized by 5 kV/µs common-mode transient rejection

Logic Output Optoisolators Applications

• Variable-speed drive systems
• Electric vehicle control circuits
• Induction cooker interfaces
• Solar power inverter controls

Logic Output Optoisolators Procurement Notes

Verify the specific suffix code (e.g., -000E vs #300) as it determines the package type and reel/tube configuration. Confirm RoHS compliance status for the exact part number variant. Ensure the supplier source matches the manufacturer's authorized distribution channels to guarantee component authenticity and traceability.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required between low-voltage control logic and higher-voltage power stages. The dual-channel configuration allows for simultaneous signal isolation. Verify that the 50 mA maximum collector current meets the load requirements of the receiving circuitry before finalizing the design.

Logic Output Optoisolators Part Context

This device belongs to the HCPL family of optocouplers designed for industrial and commercial applications requiring reliable galvanic isolation. The HCPL-2630 specifically targets high-speed data transfer needs where standard optocouplers may introduce excessive propagation delay or signal distortion.

Logic Output Optoisolators Replacement Considerations

Check for direct pin-compatible alternatives within the same HCPL series. Verify that any substitute maintains the 10 Mb/s data rate and 3750 Vrms isolation rating. Ensure the replacement supports the same open-collector output structure and operating temperature range.