HCPL-3700-000E

$4.12

Description：OPTOISOLTR 3.75KV 1CH DARL 8-DIP
Series：-
Mfr：Broadcom Limited
Package：Tube

SKU:37405e658ff9 Category: Transistor, Photovoltaic Output Optoisolators Brand: Broadcom Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCPL-3700-000E is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Broadcom Limited. Its product description is OPTOISOLTR 3.75KV 1CH DARL 8-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for HCPL-3700-000E

Description：OPTOISOLTR 3.75KV 1CH DARL 8-DIP
Series：-
Mfr：Broadcom Limited
Package：Tube
Number of Channels：1
Voltage - Isolation：3750Vrms
Current Transfer Ratio (Min)：-
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：4µs, 10µs
Rise / Fall Time (Typ)：20µs, 0.3µs
Input Type：AC, DC
Output Type：Darlington
Voltage - Output (Max)：20V
Current - Output / Channel：30mA
Voltage - Forward (Vf) (Typ)：-
Current - DC Forward (If) (Max)：-
Vce Saturation (Max)：-
Operating Temperature：-40°C ~ 85°C
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for HCPL-3700-000E

HCPL-3700-000E

Transistor, Photovoltaic Output Optoisolators Overview

The HCPL-3700-000E is a logic output optocoupler designed for AC/DC to logic interface applications. It features an open collector output and operates in a DIP-8 through-hole package. Key electrical parameters include a maximum continuous output current of 30 mA, an isolation voltage of 3750 Vrms, and a power dissipation of 305 mW. The device has a typical rise time of 20 us and a fall time of 300 ns. It functions within a temperature range of 0 C to +70 C.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Utilizes threshold sensing input buffer ICs for isolated voltage or current detection
Provides open collector output configuration for direct logic interfacing
Designed specifically for AC-to-DC logic interface and Intelligent Power Module applications

Transistor, Photovoltaic Output Optoisolators Applications

Limit switch sensing
Low voltage detector circuits
AC mains and DC link voltage detection
Relay contact monitoring
Relay coil voltage monitoring

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '000E' against official Broadcom documentation to confirm RoHS compliance status and exact thermal ratings. Ensure the DIP-8 through-hole package matches the target PCB footprint. Confirm that the 3750 Vrms isolation rating meets the safety requirements of the intended circuit design before finalizing procurement.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when isolating high-voltage AC or DC signals from low-voltage logic circuits. The open collector output requires appropriate pull-up resistors. Consider the 20 us rise time limitation for signal speed requirements. Verify that the operating temperature range of 0 C to +70 C aligns with the environmental conditions of the application system.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the HCPL series of optocouplers manufactured by Broadcom Limited. It is distinct from standard digital optocouplers as it incorporates internal threshold sensing circuitry. This integration allows for direct detection of voltage levels without external comparators, simplifying the design of protection and monitoring circuits in power electronics.