HCPL-817-00LE

$0.12

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：Broadcom Limited
Package：Tube

SKU:fdaf0f1e7f21 Category: Transistor, Photovoltaic Output Optoisolators Brand: Broadcom Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCPL-817-00LE is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Broadcom Limited. Its product description is OPTOISOLATOR 5KV 1CH TRANS 4-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for HCPL-817-00LE

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：Broadcom Limited
Package：Tube
Number of Channels：1
Voltage - Isolation：5000Vrms
Current Transfer Ratio (Min)：50% @ 5mA
Current Transfer Ratio (Max)：100% @ 5mA
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：4µs, 3µs
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Vce Saturation (Max)：200mV
Operating Temperature：-30°C ~ 100°C
Mounting Type：Through Hole
Package / Case：4-DIP (0.300", 7.62mm)
Supplier Device Package：4-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for HCPL-817-00LE

HCPL-817-00LE

Transistor, Photovoltaic Output Optoisolators Overview

The HCPL-817-00LE is a single-channel phototransistor optocoupler from Broadcom Limited, housed in a 4-pin DIP package. It features an input-output isolation voltage of 5000Vrms and operates within a temperature range of -30°C to 100°C. The device exhibits a typical rise time of 4μs and a minimum current transfer ratio (CTR) of 50% at an input current of 5mA. Maximum forward voltage is specified at 1.2V or 1.4V depending on the source variant, with a maximum input current of 5mA.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Integrates a light-emitting diode optically coupled to a phototransistor for signal transmission
Provides high-density electrical isolation between input and output circuits
Complies with UL, IEC, EN, and CSA safety standards

Transistor, Photovoltaic Output Optoisolators Applications

General-purpose digital signal isolation
Microprocessor system interfacing
Industrial control circuit isolation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix against official datasheets to confirm pinout and packaging variations. Ensure compliance with required safety certifications such as UL or IEC for the target application environment. Confirm operating temperature ranges match system requirements before integration.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component for applications requiring robust galvanic isolation with moderate speed requirements. The 4-pin DIP format facilitates through-hole mounting. Verify that the 5000Vrms isolation rating meets the system's safety clearance needs.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the HCPL series of optocouplers, designed for general-purpose isolation tasks. The series offers various packaging options including wide-lead spacing and lead bend SMD variants to accommodate different board layout constraints.