HI3-0518-5

$24.83

Description：IC MUX 8:1 750OHM 18DIP
Series：-

SKU:d86cc2e3a9b8 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Intersil

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HI3-0518-5 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Intersil. Its product description is IC MUX 8:1 750OHM 18DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for HI3-0518-5

Description：IC MUX 8:1 750OHM 18DIP
Series：-
Mfr：Intersil
Package：Tube
Switch Circuit：-
Multiplexer/Demultiplexer Circuit：8:01
On-State Resistance (Max)：750Ohm
Channel-to-Channel Matching (ΔRon)：-
Voltage - Supply, Single (V+)：-
Voltage - Supply, Dual (V±)：±15V
Switch Time (Ton, Toff) (Max)：175ns, 175ns
-3db Bandwidth：-
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：5pF, 10pF (Max)
Current - Leakage (IS(off)) (Max)：10pA (Typ)
Crosstalk：-
Operating Temperature：0°C ~ 75°C (TA)
Mounting Type：Through Hole
Package / Case：18-DIP (0.300", 7.62mm)
Supplier Device Package：18-PDIP
Number of Circuits：1
Grade：-
Qualification：-

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for HI3-0518-5

HI3-0518-5

Analog Switches, Multiplexers, Demultiplexers Overview

The HI3-0518-5 is an 8-channel, single-ended analog multiplexer manufactured by Intersil. It is housed in a 16-pin Plastic Dual In-Line Package (PDIP). The device operates with a rated supply voltage of +15 V and -15 V. It features a maximum on-resistance of 1800 ohms and provides a shutdown isolation rating of 68 dB. The component is designed for commercial extended temperature ranges, functioning between 0.0°C and 75°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Provides eight independent signal channels within a single integrated circuit package
Utilizes single-ended input architecture for signal routing applications
Offers high isolation performance during shutdown states to prevent signal leakage

Analog Switches, Multiplexers, Demultiplexers Applications

Data acquisition systems requiring multi-channel signal selection
Industrial process control instrumentation
Medical equipment signal conditioning circuits

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific manufacturer source, as Intersil operations were acquired by Renesas Electronics. Confirm that the part number corresponds to the original Intersil specifications rather than a later rebranded variant. Ensure the PDIP-16 package type matches the design requirements. Check for RoHS compliance status if environmental regulations apply to the final assembly.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a low-cost, general-purpose 8-channel multiplexer is required. The 1800 ohm on-resistance is suitable for lower impedance loads or applications where resistance variation is less critical. Consider the PDIP-16 package for through-hole prototyping or legacy board designs. Evaluate the 68 dB isolation against system noise requirements.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the HI-3xxx series of analog switches and multiplexers produced by Intersil. These devices are widely used in mixed-signal environments for routing analog signals. The series typically offers various channel counts and packaging options to suit different integration needs.